FS: Brand New condition iForged Technik 20s staggered
#1
FS: Brand New condition iForged Technik 20s staggered
Hi guys,
I am selling my set of Techniks. I sent these into iForged to get the new ceramic clearcoat done. I did this back in April and I finally got them back. In that time, I've decided to do something else. These are basically brand new as iForged stripped it down and redid everything. All four are now in iForged boxes (sealed by iForged) ready to ship.
I have not opened the boxes to confirm iForged did what I paid them to do but if a serious buyer wants to be sure, I will crack them open to check and take some pics. The boxes are at TM Engineering right now for safe keeping so even I have not even personally seen them yet.
The specs are:
20x8.5 +43
20x10 +38
2-piece, no-rivets
Brushed Alum face
Polished lips and inners
Ceramic clears on face and lips
From the last GB from D2, pricing for this setup would be 2550 (rims) + 300 (brushed) + $100 (shipping) = $2950 + 8-10 weeks wait.
I'd like to get $2800 shipped + no wait other than shipping time
I don't know how much it is to ship the rims but if it is less than $100 to your location, I will adjust the amount and if it is more, I will "eat" the rest. This is only for the mainland states since anywhere else WILL cost more. Sorry. I will also take off the $100 if someone picks them up.
*** Just a note on the rear offsets. For the GS, they are a little more aggressive and you will need to modify your rear fenders. I cut the fenders up to the screws to hold the black trim. That is enough. I was able to keep the trim to keep the front and rear fenders look OEM and uniform with the trim. ***
I am selling my set of Techniks. I sent these into iForged to get the new ceramic clearcoat done. I did this back in April and I finally got them back. In that time, I've decided to do something else. These are basically brand new as iForged stripped it down and redid everything. All four are now in iForged boxes (sealed by iForged) ready to ship.
I have not opened the boxes to confirm iForged did what I paid them to do but if a serious buyer wants to be sure, I will crack them open to check and take some pics. The boxes are at TM Engineering right now for safe keeping so even I have not even personally seen them yet.
The specs are:
20x8.5 +43
20x10 +38
2-piece, no-rivets
Brushed Alum face
Polished lips and inners
Ceramic clears on face and lips
From the last GB from D2, pricing for this setup would be 2550 (rims) + 300 (brushed) + $100 (shipping) = $2950 + 8-10 weeks wait.
I'd like to get $2800 shipped + no wait other than shipping time
I don't know how much it is to ship the rims but if it is less than $100 to your location, I will adjust the amount and if it is more, I will "eat" the rest. This is only for the mainland states since anywhere else WILL cost more. Sorry. I will also take off the $100 if someone picks them up.
*** Just a note on the rear offsets. For the GS, they are a little more aggressive and you will need to modify your rear fenders. I cut the fenders up to the screws to hold the black trim. That is enough. I was able to keep the trim to keep the front and rear fenders look OEM and uniform with the trim. ***
Last edited by Neo; 08-16-05 at 01:14 AM.
#4
Just so that there is no confusion, this is for rims only. I also still have the tires but I did not remount them so I can keep the rims in the same condition as new from iForged. I was planning to use the tires for my next set but I am open to including the tires for a "dicounted" price since these ARE used (about 6000 miles).
Trending Topics
#8
Lexus Test Driver
I can also vouch for Neo. I bought a set of wheels from him and they were in absolutely mint, mint condition and in much better condition than what I expected. Expect nothing but the best! Good luck on the sale as those rims are simply stunning.
BTW, what are you planning on getting next?
BTW, what are you planning on getting next?