NAD 6 wheels 20" for SC430 etc...
#1
Pole Position
Thread Starter
NAD 6 wheels 20" for SC430 etc...
Hey, I'm selling the wheels that came with my car. They are NAD 6 wheels in 20x8.5 and 20x9.5 Since they came with the car (from a Mission Viejo Lexus) I don't know the offset but I'm taking a educated guess at ET30 front and ET30 rear. They easily fit on my SC430 and should fit on all GS's, SC's and LS's. The wheels are in very good condition with only one small curb mark to speak of (I bought the car like this) and I'm going to try to polish out the lip (Nad wheels have a stainless steel lip that can be replaced) and I'm almost betting that it will come out. Other than that, the wheels look brand new. I'm giving the condition a 8 out of 10, and if the lip polishes out, a 9 out 10. Plus you can always get a new stainless lip from Nad.
The tires are almost brand new (with barely any wear, and i do mean barely) and are Falken FK452 in 235/30/20 front and 275/30/20 rears. The wheels also have the TPM sensors as once I put on my new wheels the light on my dash came on.
I'm hoping to get $1300 (edit 10/01) for the wheels and tires. The tires and TMP sensors are worth over $900 alone. No lugs and no hub centric rings but the rings you can get at any tire store as they are universal. I would rather not ship the wheels so I'm hoping someone in the Socal area takes these off my hands..
Thanks
Ken
The tires are almost brand new (with barely any wear, and i do mean barely) and are Falken FK452 in 235/30/20 front and 275/30/20 rears. The wheels also have the TPM sensors as once I put on my new wheels the light on my dash came on.
I'm hoping to get $1300 (edit 10/01) for the wheels and tires. The tires and TMP sensors are worth over $900 alone. No lugs and no hub centric rings but the rings you can get at any tire store as they are universal. I would rather not ship the wheels so I'm hoping someone in the Socal area takes these off my hands..
Thanks
Ken
Last edited by hipendicul; 10-01-06 at 02:58 PM.
#6
Pole Position
Thread Starter
In near orange county or north of Long Beach...
I'll take some pics of the wheels this weekend. But trust me this is one hell of a deal. The wheels are in very good shape and the tires look brand new (I rolled on them for less than 3k miles)
I don't want to list them on Ebay but I have to get these out of my garage soon...
Thanks
Ken
I'll take some pics of the wheels this weekend. But trust me this is one hell of a deal. The wheels are in very good shape and the tires look brand new (I rolled on them for less than 3k miles)
I don't want to list them on Ebay but I have to get these out of my garage soon...
Thanks
Ken
Trending Topics
#10
Pole Position
Thread Starter
I'm pretty sure they will as I had about 1/2" or more but I'm guessing at the very least a 5mm spacer.
As far as the shipping, I'll split the shipping with the buyer. I'm guessing that shipping will be around $200 or so with insurance.
So let me know and thanks for the interest..
Ken
As far as the shipping, I'll split the shipping with the buyer. I'm guessing that shipping will be around $200 or so with insurance.
So let me know and thanks for the interest..
Ken
#13
Lexus Test Driver
iTrader: (3)
Join Date: Jul 2006
Location: South OC, California
Posts: 1,106
Likes: 0
Received 0 Likes
on
0 Posts
I am still looking for a reply to the offset, it should stamped on the inside or back of one of the spokes next to ET. I'm local and have given you my phone number two times...
Call me to discuss
Call me to discuss
#14
Pole Position
Thread Starter
Hey sorry.. Been busy this weekend but I'm going to check the wheels today for the offsets and I'll get some pictures of the wheels and the damaged lip. Its all cosmetic, fwiw..
But stay tuned..
Thanks
Ken
Ok, stamped on the front wheels is 20x8.5 ET35 and the rear wheels say 20x10 ET??. Right now the best information I can get on the rear wheels is a ET40, which sounds right. Also, I have sanded down the curb marks on the one rear wheel and I think it came out pretty good. I'll post up some pics here in a minute..
But stay tuned..
Thanks
Ken
Ok, stamped on the front wheels is 20x8.5 ET35 and the rear wheels say 20x10 ET??. Right now the best information I can get on the rear wheels is a ET40, which sounds right. Also, I have sanded down the curb marks on the one rear wheel and I think it came out pretty good. I'll post up some pics here in a minute..
Last edited by hipendicul; 10-02-06 at 07:00 PM.