FS: 20" iForged Trials in Black $2000 OBO
11-15-06 | 03:10 PM
#5
20" Black Iforged Trials with Polish Lip 2 Piece Wheels
Front - 20x8.5 offset +38 3" Lip
Rear - 20x10 offset +42 4" Lip
Only the front has tires, it about 70% left
Front - Nitto NT555 - 225/35/20
Each wheel has very minor bent on the inside of the wheel. No bents on the outside. Each wheel on the outside has small minor rash and nick. One of them has a rash on about 1/3 of the wheel. It would be best to repolish all 4 of the wheel outter lip to make it like new again. I believe polishing is about $40 to $80 each.
Condition is 7/10
Asking Price: $2000 OBO
Located in South Cali, Pick UP Only
I DONT HAVE ANY PIX OF THE RASH OR CRUB, WILL HAVE TO COME SEE IT IN PERSON.
Front - 20x8.5 offset +38 3" Lip
Rear - 20x10 offset +42 4" Lip
Only the front has tires, it about 70% left
Front - Nitto NT555 - 225/35/20
Each wheel has very minor bent on the inside of the wheel. No bents on the outside. Each wheel on the outside has small minor rash and nick. One of them has a rash on about 1/3 of the wheel. It would be best to repolish all 4 of the wheel outter lip to make it like new again. I believe polishing is about $40 to $80 each.
Condition is 7/10
Asking Price: $2000 OBO
Located in South Cali, Pick UP Only
I DONT HAVE ANY PIX OF THE RASH OR CRUB, WILL HAVE TO COME SEE IT IN PERSON.
Trending Topics
11-17-06 | 10:41 AM
#10
You had to run a 10mm spacer on those offsets with LS calipers? Those are the same offsets as my Racing Harts on my Supra TT and the calipers are the same size as the LS. Are you sure they are 38mm? Cuz I know IForged doesn't give out the offset info.
Last edited by Supraristo; 11-17-06 at 10:45 AM.
11-17-06 | 10:44 AM
#11
Thread Starter
Driver
Joined: Jul 2004
Posts: 138
Likes: 0
From: California
offset has nothing to do with brake clearance, it the design of the disk and spokes. The front has 3" lip which is why you need spacer to clear.
11-29-06 | 03:59 PM
#15
Thread Starter
Driver
Joined: Jul 2004
Posts: 138
Likes: 0
From: California