I've got a set of 18x8 +35 OZ Opera wheels that were made in Italy and come with Kumho Ecsta Supra 712s 225/40 mounted and balanced. These wheels were on my car for between 2-3k miles before I took them off. They were put on mainly for show and photo purposes and didn't see much dd use. I did, however, make the mistake of leaving them on when I went to LAX so now there's a very small, light curb mark on one of the wheels. All the other three are still perfect after inspecting them last, and none of the wheels are bent. Except for the small curb rash on one, this set is just as good as the day they came out of the factory.

Asking price is $800, picked up in North Orange County, CA. I will consider shipping offers, but will require the buyer to pay actual shipping charges. Thanks for looking.

 

Man, OZ Operas will always have a place in my heart! Leets! Long time no see since back in the CyberGS3 days huh? Hope all is well. I'll see if any pals may be interested.

 

sent PM to you

 

clear bbk?

 

As far as I know, they'll clear. They're +35 and don't have a deep lip so there's lots of clearance behind the face.

 

did you get my PM?

 

sorry I missed it, just responded.

 

Are they +35 offset for all of them?

 

yes, same wheels all around

 

For those curious about BBK clearance there's about 2.5 mm from the face of the wheel to the back of the spokes.

 

the wheels are still available

 

They will not fit a BBK without a spacer i have the 20 versions with 8.5 and 9.5 and they don't have anywhere near the clearance i need , so i am using 2, 15mm spacers to clear them. The hub surface to outside of the calipers face is 7mm , 10mm is the lowest gap(x factor) to safely run a BBK or a 95 and up LS.

 

Thank you for clarifying.

 

wheels still available

 

back to the top