Got lip?? FS: 19" Staggered SSR Vienna Sovereign for 2nd Gen GS
02-02-07, 11:49 AM
#1
Rookie
Thread Starter
Join Date: Oct 2002
Location: California
Posts: 55
Likes: 0
Received 0 Likes
on
0 Posts
Got lip?? FS: 19" Staggered SSR Vienna Sovereign for 2nd Gen GS
Rare set of SSR Vienna Sovereigns Super Low Disc in Black for 2nd Gen GS.
19 x 10 et 35 rear
19 x 9 et 38 front
Asking price is $ 3000 + actual shipping, Local pick up preferred. Because of the fees that paypal will bang me with, I prefer a cash payment or postal money order on these.
Falken Tires are free. Fronts are OK, One of the rears are out of round because I never got the car aligned after I lowered it and the toe-in feathered the tire pretty bad. Tires are cheap for me so it wasn't a big deal.
Spacers, lugnuts, hubcentric rings and wheel locks are included.
So Cal people - the wheels in are in Gardena if you would like to take a look, Mon-Fri. If you are not from the So Cal area, I highly recommend that you have someone in the area take a look at these for you.
Please read regarding fitment:
This wheel set was purchased around 3-4 years ago directly from Bob at The Source in Hawaii before Tire Rack had exclusive distribution on SSR. The fitment is very aggressive and will not clear any type of big brake kit and is not an off the shelf fitment. I don't think these are available for sale from SSR anymore.
The front is a +38 offset, super low disc for maximum lip, no rubbing on the fenders. 3" of lip (see pics) 245/35/19 Falken Azenis.
The rear is a +35 et and REQUIRES a 3mm spacer to clear the rear brake caliper which I will include. 4" of lip (see pics) 275/30/19 Falken Azenis.
I have run 275/35/19 Toyo T1-S' on the rear at one time and it did require removing the black fender trim on the inside of the rear fender and trimming the edge of the inner fender to prevent it from rubbing.
On the current tire set up, 275/30/19 Falken Azenis, the fender lining was reinstalled and there is was no rubbing with 2 fat guys sitting in the back seat. However, the vehicle was lowered almost as low as you could go and there was a lot of negative camber. Also keep in mind that Falken Azenis tires are narrower than other tire companies offering the same size.
There is are no bends on the wheels and no real curb rash. There are a few nicks here and there but nothing major. Due to the tire size, the outer edge of the lips were always exposed to the elements and there are some small scratches. Also there are mounting marks on the outer edge of the lips from when the tires were mounted. All scratches are not too bad and could be polished out (not polish as in wax) by a professional wheel or metal polishing company.
PM any questions or reasonable offers. Thanks.
Pictures.
On the car.
Fronts
Rears
Scratches on the edge of the lip from mounting
Lip
Back of 1 rear wheel contacted brake caliper during initial fitment. Can not be seen from the outside.
19 x 10 et 35 rear
19 x 9 et 38 front
Asking price is $ 3000 + actual shipping, Local pick up preferred. Because of the fees that paypal will bang me with, I prefer a cash payment or postal money order on these.
Falken Tires are free. Fronts are OK, One of the rears are out of round because I never got the car aligned after I lowered it and the toe-in feathered the tire pretty bad. Tires are cheap for me so it wasn't a big deal.
Spacers, lugnuts, hubcentric rings and wheel locks are included.
So Cal people - the wheels in are in Gardena if you would like to take a look, Mon-Fri. If you are not from the So Cal area, I highly recommend that you have someone in the area take a look at these for you.
Please read regarding fitment:
This wheel set was purchased around 3-4 years ago directly from Bob at The Source in Hawaii before Tire Rack had exclusive distribution on SSR. The fitment is very aggressive and will not clear any type of big brake kit and is not an off the shelf fitment. I don't think these are available for sale from SSR anymore.
The front is a +38 offset, super low disc for maximum lip, no rubbing on the fenders. 3" of lip (see pics) 245/35/19 Falken Azenis.
The rear is a +35 et and REQUIRES a 3mm spacer to clear the rear brake caliper which I will include. 4" of lip (see pics) 275/30/19 Falken Azenis.
I have run 275/35/19 Toyo T1-S' on the rear at one time and it did require removing the black fender trim on the inside of the rear fender and trimming the edge of the inner fender to prevent it from rubbing.
On the current tire set up, 275/30/19 Falken Azenis, the fender lining was reinstalled and there is was no rubbing with 2 fat guys sitting in the back seat. However, the vehicle was lowered almost as low as you could go and there was a lot of negative camber. Also keep in mind that Falken Azenis tires are narrower than other tire companies offering the same size.
There is are no bends on the wheels and no real curb rash. There are a few nicks here and there but nothing major. Due to the tire size, the outer edge of the lips were always exposed to the elements and there are some small scratches. Also there are mounting marks on the outer edge of the lips from when the tires were mounted. All scratches are not too bad and could be polished out (not polish as in wax) by a professional wheel or metal polishing company.
PM any questions or reasonable offers. Thanks.
Pictures.
On the car.
Fronts
Rears
Scratches on the edge of the lip from mounting
Lip
Back of 1 rear wheel contacted brake caliper during initial fitment. Can not be seen from the outside.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
tiger4life
Wheels and Tires Classifieds
16
06-17-12 09:08 AM
SLVRGS
Wheels and Tires Classifieds
3
08-12-11 02:53 PM
FutureGSorIS
Wheels and Tires Classifieds
13
01-22-05 10:53 AM
