20" Staggered OZ Opera II with polished lip and tires. Free Shipping!
03-27-07, 08:26 PM
#1
Driver School Candidate
Thread Starter
Join Date: Mar 2007
Location: ca
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
20" Staggered OZ Opera II with polished lip and tires. Free Shipping!
Set of 4 staggered 20" OZ Opera II polished lip with barely used tires. $1400 SHIPPED within the US! SOLD!!!
These OZ wheels are top quality and design. I bought these wheels for about $3000 and they are in very good condition. Got the lip polished recently so the wheels are almost like new. It has a very minor barely visible dent size of a rice grain and minor scratch on the front wheels from the tire shop when I got my new tires. Not exactly sure for the offset but 20x9 in front and 20x10 in back with Nitto Extreme tires with 90% plus tread left in them. 245/30/20 in front and 275/35/20 in the back. Paid $900 for the tires. Lug nuts and wheel locks included. Hard to let these go but have a baby on the way. Thanks for looking, pm me if interested.
These OZ wheels are top quality and design. I bought these wheels for about $3000 and they are in very good condition. Got the lip polished recently so the wheels are almost like new. It has a very minor barely visible dent size of a rice grain and minor scratch on the front wheels from the tire shop when I got my new tires. Not exactly sure for the offset but 20x9 in front and 20x10 in back with Nitto Extreme tires with 90% plus tread left in them. 245/30/20 in front and 275/35/20 in the back. Paid $900 for the tires. Lug nuts and wheel locks included. Hard to let these go but have a baby on the way. Thanks for looking, pm me if interested.
Last edited by PaulJ-GS4; 03-30-07 at 06:41 PM. Reason: SOLD!
03-28-07, 04:38 PM
#5
03-29-07, 03:20 PM
#7
Lexus Champion
iTrader: (6)
Join Date: Nov 2002
Location: Mississauga,Ontario,Canada
Posts: 3,488
Likes: 0
Received 8 Likes
on
8 Posts
I have the exact same wheels on my car , they do not fit for sure the way they are , you need to add a 15 mm spacer to the front in order to clear the calipers. In order to run the 15mm spacer you need to remove the hub and replace all the wheel studs.
These rims are wider than mine , my rear is 9.5 and it will not let e business card pass between the fender and rim lip. This being bigger will not fit out back unless you roll your fenders.
BTW where in Cali are you located? Do you know any members who can vouch for you?
thanks
These rims are wider than mine , my rear is 9.5 and it will not let e business card pass between the fender and rim lip. This being bigger will not fit out back unless you roll your fenders.
BTW where in Cali are you located? Do you know any members who can vouch for you?
thanks
Last edited by skperformance; 03-29-07 at 03:23 PM.
Trending Topics
03-29-07, 06:44 PM
#8
Driver School Candidate
Thread Starter
Join Date: Mar 2007
Location: ca
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
I have the exact same wheels on my car , they do not fit for sure the way they are , you need to add a 15 mm spacer to the front in order to clear the calipers. In order to run the 15mm spacer you need to remove the hub and replace all the wheel studs.
These rims are wider than mine , my rear is 9.5 and it will not let e business card pass between the fender and rim lip. This being bigger will not fit out back unless you roll your fenders.
BTW where in Cali are you located? Do you know any members who can vouch for you?
thanks
These rims are wider than mine , my rear is 9.5 and it will not let e business card pass between the fender and rim lip. This being bigger will not fit out back unless you roll your fenders.
BTW where in Cali are you located? Do you know any members who can vouch for you?
thanks
ive sold other items on another thread...
https://www.clublexus.com/forums/sho...d.php?t=271873
Lkn4aGS, newgs3 they can vouch for me.
Last edited by PaulJ-GS4; 03-29-07 at 06:48 PM.
Thread
Thread Starter
Forum
Replies
Last Post
RWDRIFTC2
Wheels and Tires Classifieds
4
08-12-07 12:48 PM
RWDRIFTC2
1Gen GS300 Classifieds (91-97)
1
08-10-07 12:34 PM
