20 inch Chrome 3pc. Zauber Gettins 4 sale..
04-24-07 | 02:59 PM
#16
Lexus Champion
Joined: Feb 2005
Posts: 4,331
Likes: 8
From: Florida
It's a sad day!
Adrian, I never thought I would see this day come!
Somebody's gonna get real lucky!
Good luck with the sale!
Somebody's gonna get real lucky!
Good luck with the sale! Well its hard for to me to say goodbye after all the great years we spent together but change has come so the gettins are up for sale.
Specs-
3pc. Chrome face, hi-polished lips (no clearcoat), and Hi-polished barrels (with clearcoat)
Front- 20x8.5 +44 offset, 2.5 inch lip, BFG 245-30-20
Rear- 20x10 +48 offset, 4 inch lip , BFG 265-30-20
I'm not sure how to measure tread % but I barely drive the car so I'm sure its very good. I have a 2.5 inch rash on the one of the rear lips from when I had the accident while my car was in my trailer. The wheel rubbed against the trailer's inner fender when I lost control. I will ship only if buyer pays for it with insurance. I prefer local pick up and will choose local buyer even if someone out of state called dibs 1st. The wheels will be coming off the car Monday, Tuesday the latest. I'm asking for $3750.00/ obo with tires. I will not seperate tires from wheels.
The wheels will not fit bbk but do to the conservative offset and curve in the spokes spacers were added front and rear to clear my brakes and I still had a very easy time fitting them. I had a set of custom hubcentric H&R spacers trimmed to my exact measurements to clear my bbk front and rear.
A 8mm spacer for the front and a 12mm rear were custom made and than anodized blk so they would blend in with the rotor hub. These cost me about $300.00 to be made. With adding the spacers my offset was +36 front and +36 rear. Still easy to fit with only a roll needed to the rear to prevent rub. I will sale the spacers seperate for $150.00 but will wait till the wheels are sold in case the buyer of the wheels wants to pick them up. I prefer paypal but the buyer must pay the fee. I can take a check but I will wait for it to clear before release the wheels.
Pics-
Pics on the car.-
Specs-
3pc. Chrome face, hi-polished lips (no clearcoat), and Hi-polished barrels (with clearcoat)
Front- 20x8.5 +44 offset, 2.5 inch lip, BFG 245-30-20
Rear- 20x10 +48 offset, 4 inch lip , BFG 265-30-20
I'm not sure how to measure tread % but I barely drive the car so I'm sure its very good. I have a 2.5 inch rash on the one of the rear lips from when I had the accident while my car was in my trailer. The wheel rubbed against the trailer's inner fender when I lost control. I will ship only if buyer pays for it with insurance. I prefer local pick up and will choose local buyer even if someone out of state called dibs 1st. The wheels will be coming off the car Monday, Tuesday the latest. I'm asking for $3750.00/ obo with tires. I will not seperate tires from wheels.
The wheels will not fit bbk but do to the conservative offset and curve in the spokes spacers were added front and rear to clear my brakes and I still had a very easy time fitting them. I had a set of custom hubcentric H&R spacers trimmed to my exact measurements to clear my bbk front and rear.
A 8mm spacer for the front and a 12mm rear were custom made and than anodized blk so they would blend in with the rotor hub. These cost me about $300.00 to be made. With adding the spacers my offset was +36 front and +36 rear. Still easy to fit with only a roll needed to the rear to prevent rub. I will sale the spacers seperate for $150.00 but will wait till the wheels are sold in case the buyer of the wheels wants to pick them up. I prefer paypal but the buyer must pay the fee. I can take a check but I will wait for it to clear before release the wheels.
Pics-
Pics on the car.-
04-24-07 | 04:31 PM
#17
Thread Starter
Lexus Fanatic
Joined: Oct 2002
Posts: 11,243
Likes: 6
From: USA
Hmmmi wonder what your getting...LOL Also guys i will ship. I just don't want to pay for it..lol so don't let that stop you..
04-24-07 | 05:48 PM
#18
I can't imagine the bluelex without the Gettins. They are my favorite wheels. I guess a true modder would want something different after a while so I understand. I still hate to see them go. Good luck with the sale.
I can't believe what Im seeing!!
04-26-07 | 01:09 AM
#21
your wife almost gave it away in tampa 
05-02-07 | 02:11 PM
#23
Thread Starter
Lexus Fanatic
Joined: Oct 2002
Posts: 11,243
Likes: 6
From: USA
OK guys, I finally was able to get to fully wash the wheels and inspect today.
I noticed that I have one wheel with a slight bend on the innerbarrel. Its the front pass. side. I also got closups of the tread left front and back.
1st the spacers..
All the wheels together.
Pass rear.(this is the wheels that had the scrape)
I noticed that I have one wheel with a slight bend on the innerbarrel. Its the front pass. side. I also got closups of the tread left front and back.
1st the spacers..
All the wheels together.
Pass rear.(this is the wheels that had the scrape)
05-10-07 | 01:29 PM
#28
Advanced
Joined: Dec 2002
Posts: 734
Likes: 13
From: Arizona
question about the spacers..............
Did you replace the stock lugs with longer ones? Seems like there wouldn't be enough bolt length protruding thru the wheel to enable the lugnut to be threaded on the the lug bolt securely with the spacers on there.
rims are sick
Did you replace the stock lugs with longer ones? Seems like there wouldn't be enough bolt length protruding thru the wheel to enable the lugnut to be threaded on the the lug bolt securely with the spacers on there.
rims are sick