H&R Trak+ 5mm Spacer
06-17-08, 01:58 PM
#5
Lexus Champion
iTrader: (8)
Join Date: May 2001
Location: So Cal
Posts: 1,952
Likes: 0
Received 0 Likes
on
0 Posts
spacers
Are they hub centric and still available????
From what I have read, it is not necessary to change the studs. Only if you go more than 5 mm or something about 8 turns for the lugnits. Anyway, better verify this with a shop. I would not want to take a chance on breaking a wheel in front especially... I have been using the 25mm H&R's in the rear for about 6 years and they make the look a much better one by far!! No issues with handling or otherwise.
Rock
From what I have read, it is not necessary to change the studs. Only if you go more than 5 mm or something about 8 turns for the lugnits. Anyway, better verify this with a shop. I would not want to take a chance on breaking a wheel in front especially... I have been using the 25mm H&R's in the rear for about 6 years and they make the look a much better one by far!! No issues with handling or otherwise.
Rock
06-17-08, 04:10 PM
#8
sorry for going ot in this guys thread..but thanks, its good to know.. i actually run a 30mm rear and a 25mm front spacer when im on the stock 17s..the 20s have a 34 offset and i wanted to push them out just a little more, thisll probably work, im gonna go find another set somewhere haha.
Thread
Thread Starter
Forum
Replies
Last Post
adamz28
3Gen GS460 / 450H / 430 / 350 / 300 Classifieds (06-12)
9
02-29-12 06:42 PM
whazzzzuup
Wheels and Tires Classifieds
8
03-13-09 12:40 PM
sc400 2nv
Wheels, Tires & Brakes Forum
9
05-24-07 02:38 AM
BUSTN
Wheels, Tires & Brakes Forum
5
08-17-06 07:22 AM
