F/S ZONE 1 Brushed Titanium Center Chrome lips
#1
Lexus Test Driver
Thread Starter
Join Date: Mar 2002
Location: Maryland
Posts: 1,248
Likes: 0
Received 0 Likes
on
0 Posts
F/S ZONE 1 Brushed Titanium Center Chrome lips
I hate to do this because I just barely got to sport these before winter came along. Up for sale are my Zone 1's in brushed titanium wheels. The specs are a 3 piece forged 20x9(f) and 20x11(r) with an offset of +37 all the way around. Lip sizes are 2"(f) and 3.5"(r)....
They will clear all BBK's except the Rotora's, then you will need a(n) 5-8mm spacers. Bob(SoCalSC4) made these specifically for our vehicles, so please call Bob for other vehicles.
You will need to do rear fender mods if you want to go lower than 1 1/2 inches. I will post recent pics up later on, but for now click on link to get an ideal. I bought them for 4600.00 with tires, but just letting the wheels go for $3100.00 shipped OBO. If you think the price is too much, I will entertain any offers. These are in pristine condition, no curb rashes or anything, no more than 2k miles on them if that. PM me or call 240-832-3929for more info. Thanks for any and all interest.....
-Joe
https://www.clublexus.com/forums/sho...d.php?t=301980
They will clear all BBK's except the Rotora's, then you will need a(n) 5-8mm spacers. Bob(SoCalSC4) made these specifically for our vehicles, so please call Bob for other vehicles.
You will need to do rear fender mods if you want to go lower than 1 1/2 inches. I will post recent pics up later on, but for now click on link to get an ideal. I bought them for 4600.00 with tires, but just letting the wheels go for $3100.00 shipped OBO. If you think the price is too much, I will entertain any offers. These are in pristine condition, no curb rashes or anything, no more than 2k miles on them if that. PM me or call 240-832-3929for more info. Thanks for any and all interest.....
-Joe
https://www.clublexus.com/forums/sho...d.php?t=301980
Last edited by R.U. IN AW?; 02-22-08 at 04:32 PM. Reason: attached link
#5
Lexus Test Driver
Thread Starter
Join Date: Mar 2002
Location: Maryland
Posts: 1,248
Likes: 0
Received 0 Likes
on
0 Posts
........
#7
Lexus Test Driver
Thread Starter
Join Date: Mar 2002
Location: Maryland
Posts: 1,248
Likes: 0
Received 0 Likes
on
0 Posts
Trending Topics
#8
You would not consider selling the tires with the setup?
Do you also have better pictures of the rims, so I can see the center cap, etc, without the lack of light in the link.
Do you also have better pictures of the rims, so I can see the center cap, etc, without the lack of light in the link.
Last edited by DCMango; 02-24-08 at 06:47 AM.
#9
Lexus Test Driver
Thread Starter
Join Date: Mar 2002
Location: Maryland
Posts: 1,248
Likes: 0
Received 0 Likes
on
0 Posts
To answer your question....
Hey Mango,
Wassup man, the only reason I wasn't selling the tires with the setup was because during the trial and error phase of cutting the lips, the rear tires got grooves cut into them by the lip of the wheel well. Honestly the really bad one is the left rear tire that got the grooves cut in. The others are fine. I didn't have to cut the front lips, so those are fine. However these still hold air and doesn't affect the wheels or ride whatsoever. The rims were never touched, so there are NO CURB RASHES.
If you want them we can work something out. Just being an honest person who doesn't rip people off. So I will consider selling as a whole setup, but just know that the left rear has grooves cutinto them. Thanks.... and oh I will get better pics today.
-Joe
#12
Lexus Test Driver
Thread Starter
Join Date: Mar 2002
Location: Maryland
Posts: 1,248
Likes: 0
Received 0 Likes
on
0 Posts
#13
Lexus Test Driver
Thread Starter
Join Date: Mar 2002
Location: Maryland
Posts: 1,248
Likes: 0
Received 0 Likes
on
0 Posts
Try...
Man that AIM hasn't worked in a long time. They sent me a notice that since I haven't logged in a long time that they decided to close it. Hit me up on the celly 240-832-3929. Thanks....
-Joe