FS: SSR VF1 in SBC finish 19" w/ Dunlop SP Sport Maxx
#1
FS: SSR VF1 in SBC finish 19" w/ Dunlop SP Sport Maxx
I oredered these wheels at SEMA last November, it took 4.5 months to get here. (buying these wheels new will get you a 3 month wait) I'm sure there not many sets of these floating around as this is the newest of the SSR line up and in the custom finish as well. They have been on my car for 3 months and am now selling the car. The retail on these wheels is $690 (f) and $750 (r), add on the SBC finsh (+$110 each wheel), the CF center caps (+$40 each cap), the new Dunlop SP Sport Maxx tires $205 and $255 per Tire Rack , and you get $4400 retail. Fitment was for IS350 (conservative offsets)
Disclosure: There are "slight bends" from our nasty roads in Houston, however, they are on the INSIDE of the wheel and they still balance perfectly. They have NO CURB RASH and look MINT. (pics provided)
I'm asking $2500 (shipping is extra).
The pics will speak for themselves. I still have the Speed Star Racing stickers (unused), SSR valve stem caps, adn included are the hub rings (already mounted) and I also will included the banding rings for the TPMS sensors (as these wheels ARE NOT TPMS compatible).
Specs:
SSR VF1 (in SBC finish) - 3 piece wheels
19" x 8.5" +37 (f) / 19" x 10" +49 (r)
Dunlop SP Sport Maxx tires
235/35/19 (f) / 275/30/19 (r)
I spend little to no time on the boards now, so PLEASE email me at glilly@swbell.net, or call my office (Underground Graphics) at 713-783-4739 for any questions, comments or further information. I will try my best to keep tabs on this thread as well.
Greg
...and the pics!!
Disclosure: There are "slight bends" from our nasty roads in Houston, however, they are on the INSIDE of the wheel and they still balance perfectly. They have NO CURB RASH and look MINT. (pics provided)
I'm asking $2500 (shipping is extra).
The pics will speak for themselves. I still have the Speed Star Racing stickers (unused), SSR valve stem caps, adn included are the hub rings (already mounted) and I also will included the banding rings for the TPMS sensors (as these wheels ARE NOT TPMS compatible).
Specs:
SSR VF1 (in SBC finish) - 3 piece wheels
19" x 8.5" +37 (f) / 19" x 10" +49 (r)
Dunlop SP Sport Maxx tires
235/35/19 (f) / 275/30/19 (r)
I spend little to no time on the boards now, so PLEASE email me at glilly@swbell.net, or call my office (Underground Graphics) at 713-783-4739 for any questions, comments or further information. I will try my best to keep tabs on this thread as well.
Greg
...and the pics!!
Last edited by glilly; 10-30-08 at 06:35 PM.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
PK Auto Design
Club Lexus Vendor Marketplace
58
04-27-20 10:39 AM
DrkSubRosa
Wheels and Tires Classifieds
7
12-14-13 10:19 AM
DaveGS4
Wheels and Tires Classifieds
25
07-09-09 10:57 PM