WTB - 90 Degree Valve Stems for 3PC Wheels
#1
Pole Position
Thread Starter
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
Ok, so I have searched all over the web and all over CL and I can't seem to find where/or who sells the 90 degree valve stems for 3 piece wheels. In case you're not aware of what these are, they are the stainless, or chrome valve stems that are used on the 3 piece wheels that attach to the inner barrel and typically come through the face of the wheel. I need all four if someone knows where to buy them. I have already tried Discount and a couple of other tire shops and haven't had any luck. I have LSportline wheels if that makes any difference, but I don't think it should.
#3
Pole Position
Thread Starter
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
#6
iModerate
#7
Pole Position
Thread Starter
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
That's exactly what I need, but they are too short. I need them at least a half inch longer. I'm going to check to see if they can get them.
Trending Topics
#8
Pole Position
Thread Starter
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
That with my order and the total is like $35, if someone else is needing anything off Prestige's Website I would purchase everything then ship your order to you, of course it would be a little extra to cover the shipping, but it would be very fair. Let me know if that sounds good to you.
#10
Pole Position
Thread Starter
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
Sounds good, maybe we can all pool together and get these. I will need you to go to the webpage listed above and let me know which models you need. They will have a four digit code like 2994 or something similar. Make sure you tell me how many you need and as soon as I have a $50 order, I will put it together. Thanks!
#11
Lead Lap
iTrader: (1)
Join Date: Jan 2007
Location: NYC
Posts: 735
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
Sounds good, maybe we can all pool together and get these. I will need you to go to the webpage listed above and let me know which models you need. They will have a four digit code like 2994 or something similar. Make sure you tell me how many you need and as soon as I have a $50 order, I will put it together. Thanks!
#13
Pole Position
Thread Starter
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
Here's what I have so far.... let me know if I'm off. You will need to measure your current valve stem to make sure you get the right size. Just measure from the angle to the tip. The 90 degree stem sizes are as follows:
2990 - 1.75" or 1 3/4" @ $2.07/ea
2992 - 2.80" or 2 13/16" @ $2.97/3a
2994 - 3.30" or 3 1/3" @ $2.97/ea
Myself - 1 set, 4 total #2990 = $8.28
Carnal - 2 sets, 8 total #2994 = $23.76
Taeng - 1 set, 4 total #TBD (measure and use guide above)
Chigger - 1 set, 4 total #2994 = $11.88
That would make the $50 minimum order even if Taeng only needed the $8.28 set. Of course that is before the cost of shipping to me and what it will cost to ship the valve stems to you and PayPal fees. I assure you I will make it very fair and I will only charge what is actual shipping/PayPal charges. I beleive that USPS is typically the most affordable route. Here's what I need you all to do next... PM me to verify this is what you need and that the size is correct for you. Once that has been done, I will place the order for us. I will then contact you with an estimated time of arrival. Once they come in I will send you a payment request and you can pay me via PayPal. Once that is done I will ship the stems to your confirmed address. Let me know if anyone has any questions. Also, if there is any questions about me, JunJDM should be more than happy to vouch for me.
2990 - 1.75" or 1 3/4" @ $2.07/ea
2992 - 2.80" or 2 13/16" @ $2.97/3a
2994 - 3.30" or 3 1/3" @ $2.97/ea
Myself - 1 set, 4 total #2990 = $8.28
Carnal - 2 sets, 8 total #2994 = $23.76
Taeng - 1 set, 4 total #TBD (measure and use guide above)
Chigger - 1 set, 4 total #2994 = $11.88
That would make the $50 minimum order even if Taeng only needed the $8.28 set. Of course that is before the cost of shipping to me and what it will cost to ship the valve stems to you and PayPal fees. I assure you I will make it very fair and I will only charge what is actual shipping/PayPal charges. I beleive that USPS is typically the most affordable route. Here's what I need you all to do next... PM me to verify this is what you need and that the size is correct for you. Once that has been done, I will place the order for us. I will then contact you with an estimated time of arrival. Once they come in I will send you a payment request and you can pay me via PayPal. Once that is done I will ship the stems to your confirmed address. Let me know if anyone has any questions. Also, if there is any questions about me, JunJDM should be more than happy to vouch for me.