Custom Made DO-LUCK Double Six Wheels (18x9.5 18x10.5 Staggered)
#1
Rookie
Thread Starter
Join Date: Jan 2006
Location: OR
Posts: 53
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
Wheel Brand: Do-Luck
Wheel Name: Double Six
Wheel Size Front: 18 x 9.5
Wheel Offset Front: +10
Wheel Size Rear: 18 x 10.5
Wheel Offset Rear: -5
Tire Brand: Toyo Proxes T1-S
Tire Size Front: 265/35/ZR18
Tire Size Rear: 275/35/ZR18
Number of Wheels/Tires available: 4
Bolt Pattern: 5 x 114.3
I have a set of Custome Made Do-Lucks. They have less then a 1000 miles on the wheels and tires. I was planning on using them on my Supra, but long story short because of the offset I would have to go wide body with my Supra and dont have the cash to do so.
These are Custom Do-Lucks. Only 2 sets (as far as I know) were made with these offsets. The Black Do-Luck Supra had set 1 and Jojo (aka Jademan) got the 2nd set for the Goldenchild. (which are these)
For Quickest Response e-mail me at speedy6777@gmail.com
Asking $4000 (just dropped to $3700) for the set of wheels and tires
Each wheel is constructed of 2 pieces forged alloy with the inner spoke section welded in place onto the outer rim, as well as with reverse tyre installation rims which means that tyres are installed or removed from the inner side of the wheel, protecting the outer ‘ show’ edge.
(I know I havent made to many post on this site but you can check my rating and post count at: northwestnissans.com supraforums.com rx7club.com all use the same porfile name griffon)
This is the car they came off of:
![](http://www.tunerzine.com/articles/205/images/_DSC0058.jpg)
![](http://www.tunerzine.com/articles/205/images/_DSC0032.jpg)
But they also look good on:
![](http://i36.photobucket.com/albums/e14/griffon240z/doluck/th_sc3001.jpg)
Wheel Name: Double Six
Wheel Size Front: 18 x 9.5
Wheel Offset Front: +10
Wheel Size Rear: 18 x 10.5
Wheel Offset Rear: -5
Tire Brand: Toyo Proxes T1-S
Tire Size Front: 265/35/ZR18
Tire Size Rear: 275/35/ZR18
Number of Wheels/Tires available: 4
Bolt Pattern: 5 x 114.3
I have a set of Custome Made Do-Lucks. They have less then a 1000 miles on the wheels and tires. I was planning on using them on my Supra, but long story short because of the offset I would have to go wide body with my Supra and dont have the cash to do so.
These are Custom Do-Lucks. Only 2 sets (as far as I know) were made with these offsets. The Black Do-Luck Supra had set 1 and Jojo (aka Jademan) got the 2nd set for the Goldenchild. (which are these)
For Quickest Response e-mail me at speedy6777@gmail.com
Asking $4000 (just dropped to $3700) for the set of wheels and tires
Each wheel is constructed of 2 pieces forged alloy with the inner spoke section welded in place onto the outer rim, as well as with reverse tyre installation rims which means that tyres are installed or removed from the inner side of the wheel, protecting the outer ‘ show’ edge.
(I know I havent made to many post on this site but you can check my rating and post count at: northwestnissans.com supraforums.com rx7club.com all use the same porfile name griffon)
This is the car they came off of:
![](http://www.tunerzine.com/articles/205/images/_DSC0058.jpg)
![](http://www.tunerzine.com/articles/205/images/_DSC0032.jpg)
But they also look good on:
![](http://i36.photobucket.com/albums/e14/griffon240z/doluck/th_sc300.jpg)
![](http://i36.photobucket.com/albums/e14/griffon240z/doluck/th_sc3001.jpg)
![](http://i36.photobucket.com/albums/e14/griffon240z/doluck/th_s15.jpg)
![](http://i36.photobucket.com/albums/e14/griffon240z/doluck/th_350z.jpg)
![](http://i36.photobucket.com/albums/e14/griffon240z/doluck/th_R34.jpg)
![](http://i36.photobucket.com/albums/e14/griffon240z/doluck/th_r32.jpg)
Thread
Thread Starter
Forum
Replies
Last Post