ill roller

Having 3 sets of wheels laying around is not working out for me, and I'm hurting for cash, so these have to go up for sale... They are Riverside MAEs in good lexus sizing. They are 18x9 +41 in front, and 18x10 +42 in the rear. There are Nexen 3000's with about 70% tread mounted in the following sizes; 225/40/18s in front and 235/40/18 in the rear, with a minor stretch. They will fit on an IS300 with nothing more than rolled fenders unless you are really low, then you'll need some camber and a minor pull in front. Should fit GS/LS without any trouble. The finish is also not perfect on them, the clearcoat is beginning to oxidize, so they could use a refinishing. These wheels will require a 3mm spacer to clear the suspension on IS300's, but I will throw my 5mm H&R hubcentric spacers in for free if necessary.

I am looking for $1000 with the tires or $800 without. I would prefer a local sale, but I will ship at the buyer's expense. (Keep in mind these wheels cost just over $3000 new, and the tires were between $4-500)

Here are some pictures:

PHML

iTrader: (33)

15. New members (either recent joiners by date or few posts) selling high dollar items may have their threads closed or removed due to the risk to our members. High dollar items are generally those over $500 but may be defined by moderator's discretion. New members selling high dollar items should be prepared or proactive in offering references from other CL members who know them, on other forums, etc.