CA weds kranze cerberus II socal vip specs
#16
Pole Position
Thread Starter
to fit the 3GS, cut rear fenders will work in the rear but the fronts wont. the front wheels do not clear my ucf20 brakes so i am assuming they will need a 10-15mm spacer for you as well, resulting in -3 offset region in the front. you will need a slight pull with camber. and stealth, what was your question??
#22
Pole Position
Thread Starter
you will need a slight pull in the front even with camber. fronts will require a 15mm spacer if used with ls400 (ucf20-up) brakes. rear will be fine with stretched tires and camber
#24
Lexus Champion
iTrader: (12)
Join Date: Jan 2009
Location: NY
Posts: 1,834
Likes: 0
Received 0 Likes
on
0 Posts
would i be able to fit this on my 1st gen Ls, fenders already shaved and front are pulled with around 1.5 camber in the rear and 1% up front, ohh and would run 255 or mayb 245 tire on rear, and would like to run 225 tire up front, but would like em 2 be 40 series tires tho
#25
Pole Position
Thread Starter
short answer: no
you must run camber if you do not have pulled fenders. my set up for my 96' ucf20 was rolled and pulled front fenders with 235 35 19 fk452 with -2.5 camber and the rears was 245 35 with -4 camber with cut fenders. so figure, the the ls400 (ucf10/11) will have no possibility of running 40 series tires especially if they are not stretched.. you may be able to pull off 225 40 19 and 235 40 9 but even then, thats if you are able to fit them. any other questions?
you must run camber if you do not have pulled fenders. my set up for my 96' ucf20 was rolled and pulled front fenders with 235 35 19 fk452 with -2.5 camber and the rears was 245 35 with -4 camber with cut fenders. so figure, the the ls400 (ucf10/11) will have no possibility of running 40 series tires especially if they are not stretched.. you may be able to pull off 225 40 19 and 235 40 9 but even then, thats if you are able to fit them. any other questions?