CA D2FORGED VS4 brilliant brushed 21" staggered for LS430/GS/SC
#1
D2FORGED VS4 brilliant brushed 21" staggered for LS430/GS/SC
Some of you know I had these awesome D2FORGED wheels on my GS; They were actually used as a "placeholder" of sorts while I was working on another wheel project.
This is a fantastic opportunity to own basically a NEW set of D2FORGED 3-piece wheels. They were on the car for month or two but it was never driven in that time.
I've re-configured the lips on these wheels to make them an easier fit for 1GS/2GS/3GS, SC430, or LS430 applications. The way the wheels are now configured they should require little (if any) vehicle modifications. If the vehicle is extremely low you may experience minor rubbing of the plastic fender liners up front when turning, due to the overall diameter of the tires (the 255/30-21s are the same height as 255/35-20, for reference).
The wheels are 5x114.3 with the hubs cut to 60.1mm, hub-centric for Lexus/Toyota vehicles.
Also, they were built to accept big brake kits; the fronts cleared my StopTechs with room to spare and the rears will clear any BBK I can think of.
Specifications:
D2FORGED VS4 5-spoke design
Centers: "BBC" finish, brushed spokes with polished windows & clear coat
Outers: Chrome plated
Inner rims: Charcoal metallic (gloss) powder coat
Center caps: billet aluminum, brushed with clear coat
Front: 21x9.0 +37 with 2.5" lip
Rear: 21x11.0 +49 with 3.5" lip
These would work great with 255/30-21 + 295/25-21 tires. These offsets would look nice on a GS or an LS430. They would be a bit weak on the SC430 but I could build them with the deeper lips to fix that.
BTW, D2Forged has the Falken FK-452s available on special in these sizes (one set only) for $1000.00 These are the exact tires I had on my car. 100 feet of street use, only driven on the street to photograph the set-up.
FITMENT: When I had these wheels on my car, they were 1/2" wider front & rear with the additional 1/2" at the outside, giving a 3" front and 4" rear lip. This is what is shown in the pics, below. I could easily rebuild the wheels this way at no additional charge. This is quite a strong fitment, especially with the Falken Fk-452s which run very wide in their 21" offerings. A different tire would offer more stretch and make the fitment easier, such as Pirelli NERO in 255/30-21 and 295/25-21. This more aggressive set-up would fit the SC430 quite well.
Keep in mind, my car has trimmed fender lips on all four corners and all quarters/fenders were pulled slightly before the car was painted. Also note that I have the OE camber adjusters set as positive as possible (-2.3 degrees) and if you maxed the camber more negative they would be an easier fit with the bigger lips.
List price for this set is $7100 ($1775 each with BBC centers, billet center caps & powder coated inners). BTW, I'm in SoCal but would box and ship them anywhere in the continental US at no charge.
I'll let these go for $4000/set for the wheels only. If you take advantage of the set of Falken rubber from D2-Autosport, the wheels AND tires can be had for $5000/set.
Questions? Get me at bigaudiobob@gmail.com
A couple VSC members know me and would likely vouch (including John aka VIPStyleCars), and a bunch of ClubLexus guys have dealt with me throughout the years, including DaveGS4 and several mods, including RICHIE, rominl, RMMGS4, Neo, etc., and a few other CL regulars such as Joe Z, TTurboPimp, R.U.IN.AW, AlSilverBullet, etc.
I'd love to keep these wheels but I have another project going on right now and cash flow is the name of the game.
My loss is your gain! Thanks for looking.
Cheers,
Bob
PICS:
This is a fantastic opportunity to own basically a NEW set of D2FORGED 3-piece wheels. They were on the car for month or two but it was never driven in that time.
I've re-configured the lips on these wheels to make them an easier fit for 1GS/2GS/3GS, SC430, or LS430 applications. The way the wheels are now configured they should require little (if any) vehicle modifications. If the vehicle is extremely low you may experience minor rubbing of the plastic fender liners up front when turning, due to the overall diameter of the tires (the 255/30-21s are the same height as 255/35-20, for reference).
The wheels are 5x114.3 with the hubs cut to 60.1mm, hub-centric for Lexus/Toyota vehicles.
Also, they were built to accept big brake kits; the fronts cleared my StopTechs with room to spare and the rears will clear any BBK I can think of.
Specifications:
D2FORGED VS4 5-spoke design
Centers: "BBC" finish, brushed spokes with polished windows & clear coat
Outers: Chrome plated
Inner rims: Charcoal metallic (gloss) powder coat
Center caps: billet aluminum, brushed with clear coat
Front: 21x9.0 +37 with 2.5" lip
Rear: 21x11.0 +49 with 3.5" lip
These would work great with 255/30-21 + 295/25-21 tires. These offsets would look nice on a GS or an LS430. They would be a bit weak on the SC430 but I could build them with the deeper lips to fix that.
BTW, D2Forged has the Falken FK-452s available on special in these sizes (one set only) for $1000.00 These are the exact tires I had on my car. 100 feet of street use, only driven on the street to photograph the set-up.
FITMENT: When I had these wheels on my car, they were 1/2" wider front & rear with the additional 1/2" at the outside, giving a 3" front and 4" rear lip. This is what is shown in the pics, below. I could easily rebuild the wheels this way at no additional charge. This is quite a strong fitment, especially with the Falken Fk-452s which run very wide in their 21" offerings. A different tire would offer more stretch and make the fitment easier, such as Pirelli NERO in 255/30-21 and 295/25-21. This more aggressive set-up would fit the SC430 quite well.
Keep in mind, my car has trimmed fender lips on all four corners and all quarters/fenders were pulled slightly before the car was painted. Also note that I have the OE camber adjusters set as positive as possible (-2.3 degrees) and if you maxed the camber more negative they would be an easier fit with the bigger lips.
List price for this set is $7100 ($1775 each with BBC centers, billet center caps & powder coated inners). BTW, I'm in SoCal but would box and ship them anywhere in the continental US at no charge.
I'll let these go for $4000/set for the wheels only. If you take advantage of the set of Falken rubber from D2-Autosport, the wheels AND tires can be had for $5000/set.
Questions? Get me at bigaudiobob@gmail.com
A couple VSC members know me and would likely vouch (including John aka VIPStyleCars), and a bunch of ClubLexus guys have dealt with me throughout the years, including DaveGS4 and several mods, including RICHIE, rominl, RMMGS4, Neo, etc., and a few other CL regulars such as Joe Z, TTurboPimp, R.U.IN.AW, AlSilverBullet, etc.
I'd love to keep these wheels but I have another project going on right now and cash flow is the name of the game.
My loss is your gain! Thanks for looking.
Cheers,
Bob
PICS:
Last edited by SoCalSC4; 07-23-09 at 11:17 AM.
Trending Topics
#11
They would be a GREAT fit for the LS430, arguably a better fit on the LS than the GS. Hub-centric and good to go!
BTW, I will include new lugs & locks at no charge.
No surprises with these wheels - not a scratch! New condition.
The charcoal metallic powder coated inner rims I chose for these are a
nice touch and will work with any exterior paint color.
BTW, I will include new lugs & locks at no charge.
No surprises with these wheels - not a scratch! New condition.
The charcoal metallic powder coated inner rims I chose for these are a
nice touch and will work with any exterior paint color.
#13
Frankly, I doubt the fronts would fit, either.
I'm near Laguna Beach, FWIW.
#14
Oh my goodness! I so wish I had the funds for these wheels this very second . I've been thinking of upgrading my 20 inch vossens to some 21's ever since I saw your ride with these rims ! Hopefully they are still available when I am ready because I think these would look great on my 98 LS! P.S. Bob you have great taste when it comes to your car bro!