IN 20" Lowenharts chrome 3-piece $2000, will ship at your expense
09-02-09, 07:53 AM
#1
Pole Position
Thread Starter
20" Lowenharts chrome 3-piece $2000, will ship at your expense
Wheels are 3 piece 20x10 rear and 20x8.5" front lowenhart ld1 chrome 114.3 x5 bolt pattern which is the toyota/lexus nissan/infiniti size with deep dish aggressive offset in rear.
Tires are bridgestone pole position 275x30x20 rear and 235x35x20 front. And have good tread left on them. Only used in summer.
Rims are in good shape, could use some good cleaning, a few spots of curb rash which at first I was really pissed off about, but unless your at a standstill and looking for it its not that big of a deal.
I am in Indianapolis (46240)
Here is a link to some high-res photos of the car, and the rims up close etc.
http://www.savefile.com/files/1849889
And the rims on my car
Tires are bridgestone pole position 275x30x20 rear and 235x35x20 front. And have good tread left on them. Only used in summer.
Rims are in good shape, could use some good cleaning, a few spots of curb rash which at first I was really pissed off about, but unless your at a standstill and looking for it its not that big of a deal.
I am in Indianapolis (46240)
Here is a link to some high-res photos of the car, and the rims up close etc.
http://www.savefile.com/files/1849889
And the rims on my car
09-06-09, 11:09 AM
#3
Pole Position
Thread Starter
I'm not positive to be honest, do you know how I can find out for sure? I do know the they fit fine on a gs4 and they fit fine on an old 1995 nissan gloria (y33), or m35 rather - not sure if that helps or not. Doing some quick research to see how I can find out...
Trending Topics
12-06-09, 12:05 PM
#11
Pole Position
Thread Starter
Well if my math and understanding of that link is corect...
The rims have a Positive offset = 34.925mm (1.375")
Here are the measurements.
wheel backspace 6 1/8" (6.125*25.4 - 155.575mm)
152.40
Wheel width
8.5 inside flange to inside flange (215.9mm)
9.5 full width (241.3)
wheel center line
120.65mm
155.575 - 120.65
Positive offset = 34.925mm (1.375")
Thanks for the link!
The rims have a Positive offset = 34.925mm (1.375")
Here are the measurements.
wheel backspace 6 1/8" (6.125*25.4 - 155.575mm)
152.40
Wheel width
8.5 inside flange to inside flange (215.9mm)
9.5 full width (241.3)
wheel center line
120.65mm
155.575 - 120.65
Positive offset = 34.925mm (1.375")
Thanks for the link!
Thread
Thread Starter
Forum
Replies
Last Post
02msmg3
Wheels and Tires Classifieds
7
09-27-11 04:40 PM
rhwimmers
Wheels and Tires Classifieds
1
06-09-11 07:39 PM
rhwimmers
Wheels and Tires Classifieds
12
05-31-10 07:37 PM
