CA FS: iForged Essens 19in RACE GOLD.
09-16-09, 10:32 AM
#1
FS: iForged Essens 19in RACE GOLD.
These are for my iForged Essens in RACE GOLD. The front are 19x8 and the rears are 19x10. The front are wrapped with 235/35/19 Toyo T1-R's and the rears with 265/35/19 Toyo T1-R's.
The tread depth percentage in the rear are at 95%, with at MOST 1,000 miles on them. The front are at around 70% tread depth left. Wheels are curently off the car.
Reason for selling is because I want a more aggresive offset stance and I don't want to have to run spacers to achieve this. The wheels are immaculate! No damage to the face of the wheel and the lips. Just some slight rash but not from a curb, most likely from hitting the fenderliner upon compression of the suspension.
I have some vouches on this website but most of my vouches come from ClubRSX with 30+ positive transactions so I'm not trying to pull a fast one on anyone here.
Asking price is $2500 w/ the tires. Will post up pictures when I get home from work tonight. Thanks for looking. Willing to meet up in southern CA from Los Angeles all the way to San Diego.
The tread depth percentage in the rear are at 95%, with at MOST 1,000 miles on them. The front are at around 70% tread depth left. Wheels are curently off the car.
Reason for selling is because I want a more aggresive offset stance and I don't want to have to run spacers to achieve this. The wheels are immaculate! No damage to the face of the wheel and the lips. Just some slight rash but not from a curb, most likely from hitting the fenderliner upon compression of the suspension.
I have some vouches on this website but most of my vouches come from ClubRSX with 30+ positive transactions so I'm not trying to pull a fast one on anyone here.
Asking price is $2500 w/ the tires. Will post up pictures when I get home from work tonight. Thanks for looking. Willing to meet up in southern CA from Los Angeles all the way to San Diego.
09-16-09, 10:30 PM
#6
I'm sorry, I should have specified. They came off my 2008 IS250. The wheels are tailor-made for this vehicle, offsets and all. I wish I knew the offset numbers but they just don't release them. I don't have any pics of them w/ the car..never even had a chance to do the photoshoot!!
Trending Topics
09-18-09, 10:24 AM
#13
Driver School Candidate
Join Date: Jun 2009
Location: NV
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
Those are beautiful!!! Any chance you could share the lip size?
If you wanted to get offsets, you could follow this image to gather the backspacing from the edge of the wheel to the rear face...
Then you can calculate the offsets by dividing your overall width by 2 and then subtracting the distance.
This would equate to:
9.5/2 = 4.75 - 5.75 = 1"
1" converted to mm = 25 mm or a et.25.
Hope that made sense...
If you wanted to get offsets, you could follow this image to gather the backspacing from the edge of the wheel to the rear face...
Then you can calculate the offsets by dividing your overall width by 2 and then subtracting the distance.
This would equate to:
9.5/2 = 4.75 - 5.75 = 1"
1" converted to mm = 25 mm or a et.25.
Hope that made sense...
