MD Linea Corse Lemans 19x8.5/19x10 (+15+20)
02-15-10, 10:06 AM
#1
Lead Lap
Thread Starter
Linea Corse Lemans 19x8.5/19x10 (+15+20)
Linea Corse Lemans
19x8.5/19x10 (+15+20)
With Bridgestone Potenza s03's
245/35/19, 275/30/19
asking $1400 OBO trades welcome for wheels with higher offsets
One wheel was bent but i got it repaired, cost me $200, but the lip needs to be hit with some gloss. Its in great condition tho.
a lil tire rub never hurt anyone. just a little rub when i test fitted them. they didn't work, the offsets are too low. but i never drove on them just took the pics from my driveway, backed it back up into garage and took them off. they've been in my garage ever since. some rubber came off the rear tires when i rubbed briefly but they are fine.
*will have pics of the repaired wheel up shortly
19x8.5/19x10 (+15+20)
With Bridgestone Potenza s03's
245/35/19, 275/30/19
asking $1400 OBO trades welcome for wheels with higher offsets
One wheel was bent but i got it repaired, cost me $200, but the lip needs to be hit with some gloss. Its in great condition tho.
a lil tire rub never hurt anyone. just a little rub when i test fitted them. they didn't work, the offsets are too low. but i never drove on them just took the pics from my driveway, backed it back up into garage and took them off. they've been in my garage ever since. some rubber came off the rear tires when i rubbed briefly but they are fine.
*will have pics of the repaired wheel up shortly
Last edited by 6Sp33d; 02-15-10 at 10:21 AM.
Trending Topics
02-22-10, 12:03 PM
#13
Driver School Candidate
There is 25.4mm in an inch
215mm/25.4= 8.4in
225mm/25.4mm= 8.8
Sounds like a good fit to me, the front tires you have on there now are too big(overall diameter-wise)
Are you rubbing front or back?
Your rear fenders do not even look like they are rolled.
My personal opinion would be to keep them and make them fit better, but at the end its your car/wheels.
215mm/25.4= 8.4in
225mm/25.4mm= 8.8
Sounds like a good fit to me, the front tires you have on there now are too big(overall diameter-wise)
Are you rubbing front or back?
Your rear fenders do not even look like they are rolled.
My personal opinion would be to keep them and make them fit better, but at the end its your car/wheels.
02-22-10, 12:08 PM
#15
Lead Lap
Thread Starter
There is 25.4mm in an inch
215mm/25.4= 8.4in
225mm/25.4mm= 8.8
Sounds like a good fit to me, the front tires you have on there now are too big(overall diameter-wise)
Are you rubbing front or back?
Your rear fenders do not even look like they are rolled.
My personal opinion would be to keep them and make them fit better, but at the end its your car/wheels.
215mm/25.4= 8.4in
225mm/25.4mm= 8.8
Sounds like a good fit to me, the front tires you have on there now are too big(overall diameter-wise)
Are you rubbing front or back?
Your rear fenders do not even look like they are rolled.
My personal opinion would be to keep them and make them fit better, but at the end its your car/wheels.
And yes I have no fender work.
Thanks for all the great advice.