TX 20 inch VIP modular VR08.....................VOUCHED!!!!
#62
So I've gotten several people interested in buying these with G35s who are unsure what to do. Usually I just tell people to do their own homework and search because I know nothing about these cars but today I felt nice and did the leg work for someone. Here are my findings. The closest thing I found was this
http://rimtuck.com/photos.php?photo=...jpg&id=832&h=2
http://rimtuck.com/photos.php?photo=...jpg&id=832&h=4
http://rimtuck.com/photos.php?photo=...jpg&id=832&h=6
http://rimtuck.com/photos.php?photo=...jpg&id=832&h=7
By comparing his width and offset, my wheels will be 4 mm less aggresive, this means they will be 4mm more inside the fender, not poking out past it. Same thing for the rear, 4mm less aggresive.
Here is another one
http://rimtuck.com/photos.php?photo=...pg&id=1185&h=4
Compared to his, my fronts are 8mm less aggresive in the front and the rears are 5mm less. Hope this helps G35 drivers. Both have great fitment for G35s, imo.
Do some research folks, it doesn't matter what I did to my car to fit these unless you drive an LS400 like mine.
http://rimtuck.com/photos.php?photo=...jpg&id=832&h=2
http://rimtuck.com/photos.php?photo=...jpg&id=832&h=4
http://rimtuck.com/photos.php?photo=...jpg&id=832&h=6
http://rimtuck.com/photos.php?photo=...jpg&id=832&h=7
By comparing his width and offset, my wheels will be 4 mm less aggresive, this means they will be 4mm more inside the fender, not poking out past it. Same thing for the rear, 4mm less aggresive.
Here is another one
http://rimtuck.com/photos.php?photo=...pg&id=1185&h=4
Compared to his, my fronts are 8mm less aggresive in the front and the rears are 5mm less. Hope this helps G35 drivers. Both have great fitment for G35s, imo.
Do some research folks, it doesn't matter what I did to my car to fit these unless you drive an LS400 like mine.
#70
Buyer couldn't come up witht he money so these are back up. 3k picked up. 3k plus shipping if needed.
DK what will be required on a 460 but I think these fit a 3gs with minimal work so I would assume the same with a 460.
DK what will be required on a 460 but I think these fit a 3gs with minimal work so I would assume the same with a 460.