HRE 545r staggered 18X8.5 offset+31 front and 18X10 +41 offset rear.
They are silver centers with a polished lip. Currently have Good Year tires all around. Front tires new - Rear 60% Wheels will clear BBK

Older wheels but in good shape one front has 1.5" long 3mm wide rash on lip
One center could use a repaint but still looks OK
The rest are fine.

These are strong forged wheels.
$1600 Staggered set of HRE wheels & GY tires.
Look on Ebay HREs go for 4-5K a set just for wheels.
With these you even get a matching spare to clear the BBKs.
http://www.madwhips.com/turbocharged-lexus-sc300/
Can deliver to San Diego, LA, Yuma, Palm Springs

 

Beautiful wheels! I have these in 19s

 

Yea. If they were 19s i'd keep them. but they are a bit too small now that the kit is on. They looked great with my 97 body style.

 

do you know what the offsets on these are?

 

Yep...offset please? :-)

 

Not sure. The fronts clear 6 piston Brembos. The rears clear BBK too.
I could not get HRE to give me the numbers.
Wheel companies are so secretive.
Starting to have second thoughts about selling.

 

If you can post or PM me the serial numbers I can figure the offsets for you.

 

I didn't want to pull the wheels so I looked at my receipts. One from HRE when they worked on what is now the spare. Then the original receipt for just the wheels, over $4000.00. No serials listed Ill have to pulle the wheels and look. But I did discover the receipt from wheel boutique says 10.5 rears they are 10.
The offsets are 41 on the rear & I dont know for the fronts but they clear Brembo BBK.

I remember now how much of a pain in the *** it was to try to find a spare tire that cleared BBK.

 

Sorry. I seriously lag. Just had a new addition to the family. Here are the numbers off the rear wheel. So you can get the offsets. The fronts are not off the car yet. Ill post the numbers on them probably by Monday. So the rear is 18X10 wheel +41 offset 2.5" lip.

Cleaning up the wheels.

 

18X10 wheel +41 offset for the above pic.

 

r5s18p417030

I don't know what the r5s is but 18 = 18" wheel, 41 offset, 70 = 7.0" inner lip from bolted lip, 30 = 3.0" outter from the spoke to the lip of the wheel..

 

not willing to ship at all?

 

OK OK Ill ship them. I'm guessing greyhound or UPS. I know it can get $$$. Who here has shipped wheels before? Please chime in.
price dropped to $1600 plus shipping.
Here are the serials for the fronts so the offset is +31 for the fronts.

 

Shipping wheels is not difficult. Just find some large boxes and ductape.

I just cut bunch of card board boxes that cover up the front and the back of the wheels. Just make sure they are nice and round. Doesn't have to cover the tire but its fine either way. Use duct tape and tape around the wheel.

Measure the circumference of the wheel and the height and put them on a bathroom scale to give you an estimate. I just drop them off Fedex and usually depending on the zip code they run $50-$85 each fyi.

Don't ship UPS cause they treat 99% of their packages like garbage and I will almost guarantee a bent rim.

 

Bump. Shipping should be around $200. BTW Im not tryen to make mony on the shipping. What it costs me it will cost you.