CA FS: 20" Automonde Vitesse Staggered
05-08-11, 01:30 AM
#1
Lead Lap
Thread Starter
iTrader: (1)
Join Date: May 2001
Location: San Diego
Posts: 647
Likes: 0
Received 0 Likes
on
0 Posts
FS: 20" Automonde Vitesse Staggered
Hello, I am selling my 20" Automonde Vitesse wheels. These are coming off my IS250 and I was told by the shop I bought them from (Wheel Experts) that they would fit a 3GS as well (not sure about 2GS). My intention was to go aggressive with the fitment and as you can see from the pics, I believe I achieved that goal. These are custom forged 3 piece wheels and retailed for around $4800 new for wheels only. Here's your opportunity to get some high quality, custom 3 piece wheels for a fraction of the price.
Full Disclosure:
1. My car was lowered on Eibach Pro Kit springs. I had some rubbing in the front on wide turns and minimal rubbing in the rear when driving over dips with people in the back seats. This was after shaving my fenders. I knew this going in, but was willing to deal with a little rubbing to get the look I wanted.
2. One front wheel has a small curb rash and a couple small spots of chrome peeling on the lip. The other front wheel has a small curb rash. There is a very fine scratch on one of the rear lips that you can see on close inspection. I only noticed this when I unmounted the tires. These are very easy fixes and wouldn't prevent me from putting the wheels back on my car if I still owned it.
Specs:
Wheel Make & Model: Automonde Vitesse
Finish: Brushed Aluminum with Chrome Lips
Wheel Size (diameter and width): 20x9 (F)/20x10.5 (R)
Rear Lip Size: 4"
Wheel Offset Front: Not Sure
Wheel Offset Rear: Not Sure
Compatible with tire pressure sensors? Yes
6061-T6 Alloy
3PC Fully Forged Construction
Hubcentric Build
"EXT FORGING" - 1" lip Deeper Lip Forging
Asking Price: $1800
Prefer local southern CA pickup. I am in San Diego and am willing to meet you halfway. May consider shipping at buyers expense.
OK, on to the pics:
Full Disclosure:
1. My car was lowered on Eibach Pro Kit springs. I had some rubbing in the front on wide turns and minimal rubbing in the rear when driving over dips with people in the back seats. This was after shaving my fenders. I knew this going in, but was willing to deal with a little rubbing to get the look I wanted.
2. One front wheel has a small curb rash and a couple small spots of chrome peeling on the lip. The other front wheel has a small curb rash. There is a very fine scratch on one of the rear lips that you can see on close inspection. I only noticed this when I unmounted the tires. These are very easy fixes and wouldn't prevent me from putting the wheels back on my car if I still owned it.
Specs:
Wheel Make & Model: Automonde Vitesse
Finish: Brushed Aluminum with Chrome Lips
Wheel Size (diameter and width): 20x9 (F)/20x10.5 (R)
Rear Lip Size: 4"
Wheel Offset Front: Not Sure
Wheel Offset Rear: Not Sure
Compatible with tire pressure sensors? Yes
6061-T6 Alloy
3PC Fully Forged Construction
Hubcentric Build
"EXT FORGING" - 1" lip Deeper Lip Forging
Asking Price: $1800
Prefer local southern CA pickup. I am in San Diego and am willing to meet you halfway. May consider shipping at buyers expense.
OK, on to the pics:
Trending Topics
05-11-11, 08:27 PM
#11
wheels
Hello, I am selling my 20" Automonde Vitesse wheels. These are coming off my IS250 and I was told by the shop I bought them from (Wheel Experts) that they would fit a 3GS as well (not sure about 2GS). My intention was to go aggressive with the fitment and as you can see from the pics, I believe I achieved that goal. These are custom forged 3 piece wheels and retailed for around $4800 new for wheels only. Here's your opportunity to get some high quality, custom 3 piece wheels for a fraction of the price.
Full Disclosure:
1. My car was lowered on Eibach Pro Kit springs. I had some rubbing in the front on wide turns and minimal rubbing in the rear when driving over dips with people in the back seats. This was after shaving my fenders. I knew this going in, but was willing to deal with a little rubbing to get the look I wanted.
2. One front wheel has a small curb rash and a couple small spots of chrome peeling on the lip. The other front wheel has a small curb rash. There is a very fine scratch on one of the rear lips that you can see on close inspection. I only noticed this when I unmounted the tires. These are very easy fixes and wouldn't prevent me from putting the wheels back on my car if I still owned it.
Specs:
Wheel Make & Model: Automonde Vitesse
Finish: Brushed Aluminum with Chrome Lips
Wheel Size (diameter and width): 20x9 (F)/20x10.5 (R)
Rear Lip Size: 4"
Wheel Offset Front: Not Sure
Wheel Offset Rear: Not Sure
Compatible with tire pressure sensors? Yes
6061-T6 Alloy
3PC Fully Forged Construction
Hubcentric Build
"EXT FORGING" - 1" lip Deeper Lip Forging
Asking Price: $1800
Prefer local southern CA pickup. I am in San Diego and am willing to meet you halfway. May consider shipping at buyers expense.
OK, on to the pics:
Full Disclosure:
1. My car was lowered on Eibach Pro Kit springs. I had some rubbing in the front on wide turns and minimal rubbing in the rear when driving over dips with people in the back seats. This was after shaving my fenders. I knew this going in, but was willing to deal with a little rubbing to get the look I wanted.
2. One front wheel has a small curb rash and a couple small spots of chrome peeling on the lip. The other front wheel has a small curb rash. There is a very fine scratch on one of the rear lips that you can see on close inspection. I only noticed this when I unmounted the tires. These are very easy fixes and wouldn't prevent me from putting the wheels back on my car if I still owned it.
Specs:
Wheel Make & Model: Automonde Vitesse
Finish: Brushed Aluminum with Chrome Lips
Wheel Size (diameter and width): 20x9 (F)/20x10.5 (R)
Rear Lip Size: 4"
Wheel Offset Front: Not Sure
Wheel Offset Rear: Not Sure
Compatible with tire pressure sensors? Yes
6061-T6 Alloy
3PC Fully Forged Construction
Hubcentric Build
"EXT FORGING" - 1" lip Deeper Lip Forging
Asking Price: $1800
Prefer local southern CA pickup. I am in San Diego and am willing to meet you halfway. May consider shipping at buyers expense.
OK, on to the pics:
Thread
Thread Starter
Forum
Replies
Last Post
kped Gs430
Wheels and Tires Classifieds
16
08-20-13 10:09 AM
cm09578
Wheels and Tires Classifieds
20
10-11-11 04:44 PM
OCKlasse
Wheels and Tires Classifieds
31
08-08-07 03:26 PM
fireballs gs400
Wheels and Tires Classifieds
22
09-14-06 08:59 AM
