IL 19' Work Meister S1's
#1
19' Work Meister S1's
Going with more aggresive wheels. So these are up FOR SALE. Work meister s1 3 piece gloss black with polished lip. 19x9.5 +24 & 19x10.5 +22 bridgestone potenza re50a with about 8k on them. 245-40-19's and 275-35-19's. Good condition. Always wheel waxed, never seen snow. See pics Below Asking $3100 obo
Last edited by ohno; 05-15-11 at 07:51 PM.
#4
Forum Administrator
iTrader: (2)
Sorry, as in our rules no feelers.... either you selling them or you aren't.
Please update post or let me know and I'll remove the thread until you are ready to sell and ship.
Please update post or let me know and I'll remove the thread until you are ready to sell and ship.
Trending Topics
#9
Pole Position
iTrader: (3)
Join Date: Apr 2008
Location: NY
Posts: 277
Likes: 0
Received 0 Likes
on
0 Posts
Great set.
But i'm certain that rear is 19x10.5 +23. Judging from the face profile of the rears, they are O-disk, or deep rim disk. Work does not create a 19x10.5 +22.
Just clarifying! GLWS :thumbsup:
But i'm certain that rear is 19x10.5 +23. Judging from the face profile of the rears, they are O-disk, or deep rim disk. Work does not create a 19x10.5 +22.
Just clarifying! GLWS :thumbsup:
#10
Plasti Dip King
iTrader: (7)
Join Date: Apr 2009
Location: Pennsylvania
Posts: 65
Likes: 0
Received 0 Likes
on
0 Posts
Correct me if i am wrong, but isnt 275 tires in the rear with a +23 (or +22 as above poster said) too wide? Are my calculations correct?
i see people having to stretch 235's with these offsets.
i see people having to stretch 235's with these offsets.
#12
Pole Position
iTrader: (3)
Join Date: Apr 2008
Location: NY
Posts: 277
Likes: 0
Received 0 Likes
on
0 Posts
A 285 tire is considered square for a 10.5" wide wheel. As you can see the OP drives a 370Z, which has massive fender wells which can accommodate this sizing with absolutely no problem. The only reason why you see people stretching narrow tires on wide wheels is because that is one of the ways it will clear the fender. The IS has a MUCH more conservative fender and mounting hub distance than does the 370Z.
#13
Plasti Dip King
iTrader: (7)
Join Date: Apr 2009
Location: Pennsylvania
Posts: 65
Likes: 0
Received 0 Likes
on
0 Posts
Obviously you can physically fit a 285 tire on a 10.5 rim. you can actually fit a 305 and maybe a 315. Ive seen people over on supraforums do it. Now, the question that i am talking about here is the fender clearance. +23 is aggressive for lexus/toyota, and i believe these rims would rub the fender wells on an ISx50, and these would barely fit on a toyota supra mk4 (with cut and rolled fenders).
my +30 wheels on my old is250 was actually poking out beyond the fenders and i ran 225/40/19 tires on that.