CA 19 HARTGE CLASSICS for GS - MINT
#1
Driver School Candidate
Thread Starter
iTrader: (1)
Join Date: Dec 2006
Location: CA
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
19 HARTGE CLASSICS for GS - MINT
SOLD
DRASTIC PRICE DROP AND UPDATED PICTURES
UPDATE: My buddy wants these sold soon since I gave him back the rims since I needed to clear space in my garage and he needs to make space in his.
He wants these out as soon as possible. We had a few inquiries from out of SoCal but my buddy would did not want to take the offers to pay for shipping since the offers were just unreasonable.
Vouches and past transactions.
I purchased from the folllowing members before:
ARISTOPRA - purchased Greddy Exhaust
BLUEREX - purchased Visors and Tail Lights
I sold the following parts to the following:
CHEAP300 - sold tail lights
Apex 2JZ - sold him brand new TTE lip
VIP Jason - sold him roof spoiler
SoCal CYCO - sold him Greddy Exhaust
Rock-a-Lex - sold him RMM Strut Bar
Amoss - sold him RMM Grille
dR015 - sold him RMM 4 piece kit
Mike B (from Texas) forgot user name - sold him Tein CS coil overs
Helping out a friend sell his wheels.
These are RARE and extremely hard to find in 5x114.3 offsets since most are 5x120 (Euro - mostly BMW)
These set were made by the US Hartge distributor who wanted to showcase the wheels on the GS300 used by Pioneer Electronics for CES / SEMA and road shows through out the US.
My friend rolled on these wheels for a short time and switched wheels until he sold his GS last year.
The wheels stayed in storage for years and were wrapped until recently.
Here is the details:
German made HARTGE Classic wheels in 19 inch.
These were custom made to fit the GS300/400/430
They are staggered offset:
Front 19x8 (40 offset)
Tires - Yokohama AVS ( these were the tires to get back in the day) 245/30/19 with 75% thread
Rear 19x9 (46 offset)
Tires - Yokohama AVS 275/30/19 with about 80% thread
The condition of the rim is 9 out of 10 (I checked the face and I only found 2 small nicks - just a few centimeters so not noticeable unless you look up close and look for them)
Local pick up is preferred so you can look at the wheels for yourself but willing to ship ONLY on BUYER'S Expense
Located in Corona off the 71 Freeway (Chino / Eastvale area)
Asking $990 (originally posted at $1450)
UPDATED PICTURES:
The backs of the wheel are super clean as well - no brake dust etc. They were cleaned before being wrapped for storage
Here is the small nick (really small ) but it is on the clear coat and not the metal.
Here is the small nick on one of the rear tire. Again, this is only noticeable if you look up close and was looking for any blems.
Thanks for looking and sorry for the long post.
Have a good one.
Adrian L.
Text or call me at 562-508-0879
DRASTIC PRICE DROP AND UPDATED PICTURES
UPDATE: My buddy wants these sold soon since I gave him back the rims since I needed to clear space in my garage and he needs to make space in his.
He wants these out as soon as possible. We had a few inquiries from out of SoCal but my buddy would did not want to take the offers to pay for shipping since the offers were just unreasonable.
Vouches and past transactions.
I purchased from the folllowing members before:
ARISTOPRA - purchased Greddy Exhaust
BLUEREX - purchased Visors and Tail Lights
I sold the following parts to the following:
CHEAP300 - sold tail lights
Apex 2JZ - sold him brand new TTE lip
VIP Jason - sold him roof spoiler
SoCal CYCO - sold him Greddy Exhaust
Rock-a-Lex - sold him RMM Strut Bar
Amoss - sold him RMM Grille
dR015 - sold him RMM 4 piece kit
Mike B (from Texas) forgot user name - sold him Tein CS coil overs
Helping out a friend sell his wheels.
These are RARE and extremely hard to find in 5x114.3 offsets since most are 5x120 (Euro - mostly BMW)
These set were made by the US Hartge distributor who wanted to showcase the wheels on the GS300 used by Pioneer Electronics for CES / SEMA and road shows through out the US.
My friend rolled on these wheels for a short time and switched wheels until he sold his GS last year.
The wheels stayed in storage for years and were wrapped until recently.
Here is the details:
German made HARTGE Classic wheels in 19 inch.
These were custom made to fit the GS300/400/430
They are staggered offset:
Front 19x8 (40 offset)
Tires - Yokohama AVS ( these were the tires to get back in the day) 245/30/19 with 75% thread
Rear 19x9 (46 offset)
Tires - Yokohama AVS 275/30/19 with about 80% thread
The condition of the rim is 9 out of 10 (I checked the face and I only found 2 small nicks - just a few centimeters so not noticeable unless you look up close and look for them)
Local pick up is preferred so you can look at the wheels for yourself but willing to ship ONLY on BUYER'S Expense
Located in Corona off the 71 Freeway (Chino / Eastvale area)
Asking $990 (originally posted at $1450)
UPDATED PICTURES:
The backs of the wheel are super clean as well - no brake dust etc. They were cleaned before being wrapped for storage
Here is the small nick (really small ) but it is on the clear coat and not the metal.
Here is the small nick on one of the rear tire. Again, this is only noticeable if you look up close and was looking for any blems.
Thanks for looking and sorry for the long post.
Have a good one.
Adrian L.
Text or call me at 562-508-0879
Last edited by SST-GS400; 07-22-11 at 11:01 PM. Reason: Sold
#3
Driver School Candidate
Thread Starter
iTrader: (1)
Join Date: Dec 2006
Location: CA
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
Thanks Emu... What you been up to man. The wagon is looking tight. You still got those Hart Hyper Tuners I traded you awhile back.
Also have those chrome AME Shallens in 15 for the xB ( the ones Nilo had)
If you know anyone let me know.
Have a good one.
Also have those chrome AME Shallens in 15 for the xB ( the ones Nilo had)
If you know anyone let me know.
Have a good one.
#4
Lexus Connoisseur
I can definitely vouch for my good friend Adrian.
BTW it was back in 03 we have known each other during the start of the whole Scion movement....Scion Life and Team Scion West!
BTW it was back in 03 we have known each other during the start of the whole Scion movement....Scion Life and Team Scion West!
#5
Driver School Candidate
Thread Starter
iTrader: (1)
Join Date: Dec 2006
Location: CA
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
Damn you are right... That was back when Brian Bolain and James Farley (now with Ford) where on the Scion side of the house. Now Lexus got Brian as well as Mark Templin...some really nice guys who is really making a difference on this scene.
Wasn't the guys in SC3 ( I think that was the club name) also coming out to the Krispy Kreme meets in Cerritos back in 2003?
Wasn't the guys in SC3 ( I think that was the club name) also coming out to the Krispy Kreme meets in Cerritos back in 2003?
#6
Driver School Candidate
Thread Starter
iTrader: (1)
Join Date: Dec 2006
Location: CA
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
Ryan... I am surprised you remembered Team Scion West. I co-founded that one then split off to start SE.... Who are still active and doing big things after over 7 years.
TSW hasn't been around for a few years now. Time does fly... Glad to see that the lexus scene is still solid as ever. I am contemplating doing another GS or maybe an LS sometime soon.
TSW hasn't been around for a few years now. Time does fly... Glad to see that the lexus scene is still solid as ever. I am contemplating doing another GS or maybe an LS sometime soon.
Trending Topics
#12
Driver School Candidate
Thread Starter
iTrader: (1)
Join Date: Dec 2006
Location: CA
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
Thanks to those that PM'd me about the wheels.
They are back at my buddies house and I'll PM or text you his address so you can come check them out this weekend.
He lives just 4 miles away from my location.
Thanks again and have a good holiday weekend.
Been so swamped at work and had not had a chance to update and check PM's.
Price dropped as mentioned.
You can text me as well if you are interested or want to make an offer.
562-508-0879
Adrian
They are back at my buddies house and I'll PM or text you his address so you can come check them out this weekend.
He lives just 4 miles away from my location.
Thanks again and have a good holiday weekend.
Been so swamped at work and had not had a chance to update and check PM's.
Price dropped as mentioned.
You can text me as well if you are interested or want to make an offer.
562-508-0879
Adrian
#15
Driver School Candidate
Thread Starter
iTrader: (1)
Join Date: Dec 2006
Location: CA
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
All PMs replied to.
Please don't forgot to provide your zip code so I can check on shipping cost to your area.
If you want to check for yourself as well zip code it will ship from is 92880
Rim weighs 24-26 lbs and not sure on tires.
Dimensions are on the first post.
I'll try to weigh the wheel and tires after I let all the air out and measure dimensions tomorrow.
Have a great weekend.
Please don't forgot to provide your zip code so I can check on shipping cost to your area.
If you want to check for yourself as well zip code it will ship from is 92880
Rim weighs 24-26 lbs and not sure on tires.
Dimensions are on the first post.
I'll try to weigh the wheel and tires after I let all the air out and measure dimensions tomorrow.
Have a great weekend.