F/S: Zone 10 20x9.5 + 20x11.5 brushed with Toyo PX4
#1
Lexus Champion
Thread Starter
F/S: Zone 10 20x9.5 + 20x11.5 brushed with Toyo PX4
I love these wheels, but it's time for a change.
On the chopping block: my Zone 10 split-10 spoke wheels built Lexus-specific.
These are 3-piece forged and built here in the USA. This is the first set ever
built of this unique, new Zone style.
5x114.3 with 60.1mm center bore, no hub rings needed.
Built for my GS400 with trimmed fenders but would fit an SC430 well
or any generation GS or pre-07 LS with fender mods. My GS is pretty low but
has the camber adjusters set as POSITIVE as possible. Would be an even
easier fit with additional negative camber.
The centers are brushed with polished "triangles" and have a ceramic clear coat.
Outer rims are chrome plated, no curb rash or scratches at all.
Inner rims are powder coated blue metallic.
You would swear these are brand-new. Since buying a new '08 Odyssey
earlier this year, I basically don't drive the GS anymore except for an
occasional blast up PCH on a Sunday. These were installed in May of this
year, right before ToyotaFest, and they helped me win "Best Lexus GS."
Since then I've driven the car under 1,000 miles.
Condition: 10 on a scale of 1-10
Specs:
20x9.5 front with 2.5" lip and clearance for big brakes
20x11.5 rear with 4.0" lip and clearance for big brakes
Tires:
Toyo Proxes 4, less than 1,000 miles, installed new with the wheels.
255/30-20 front with mild stretch
295/25-20 rear with mild stretch
No nails, bubbles, or surprises. Practically new.
I'm in SoCal, so local buyer preferred. I can box and ship within continental
US at your expense if you're a serious buyer.
List on the wheels is about $6500 with the optional polished windows and
powder coated inners. This is a $7700 set-up with rubber.
In know times are tough right now, so I've priced these aggressively.
$4400 wheels & tires.
Wheels only: $3800
See page 4 for new offset and width options
bigaudiobob@gmail.com or PM me with questions. E-mail is better because I don't
check my PMs every day!
I have a few people on CL who know me and would probably vouch for me.
I don't play games or try to pull any funny business. Ask one of these guys:
Richie
Dave GS4
rominl
TLW
Neo
bluelex
alsilverbullet
Flipside909
JoeZ
Photos:
At ToyotaFest 5/3/2008:
Rolling shot (look killer when moving!)
Offset shot:
Close-up, rear wheel:
On the chopping block: my Zone 10 split-10 spoke wheels built Lexus-specific.
These are 3-piece forged and built here in the USA. This is the first set ever
built of this unique, new Zone style.
5x114.3 with 60.1mm center bore, no hub rings needed.
Built for my GS400 with trimmed fenders but would fit an SC430 well
or any generation GS or pre-07 LS with fender mods. My GS is pretty low but
has the camber adjusters set as POSITIVE as possible. Would be an even
easier fit with additional negative camber.
The centers are brushed with polished "triangles" and have a ceramic clear coat.
Outer rims are chrome plated, no curb rash or scratches at all.
Inner rims are powder coated blue metallic.
You would swear these are brand-new. Since buying a new '08 Odyssey
earlier this year, I basically don't drive the GS anymore except for an
occasional blast up PCH on a Sunday. These were installed in May of this
year, right before ToyotaFest, and they helped me win "Best Lexus GS."
Since then I've driven the car under 1,000 miles.
Condition: 10 on a scale of 1-10
Specs:
20x9.5 front with 2.5" lip and clearance for big brakes
20x11.5 rear with 4.0" lip and clearance for big brakes
Tires:
Toyo Proxes 4, less than 1,000 miles, installed new with the wheels.
255/30-20 front with mild stretch
295/25-20 rear with mild stretch
No nails, bubbles, or surprises. Practically new.
I'm in SoCal, so local buyer preferred. I can box and ship within continental
US at your expense if you're a serious buyer.
List on the wheels is about $6500 with the optional polished windows and
powder coated inners. This is a $7700 set-up with rubber.
In know times are tough right now, so I've priced these aggressively.
$4400 wheels & tires.
Wheels only: $3800
See page 4 for new offset and width options
bigaudiobob@gmail.com or PM me with questions. E-mail is better because I don't
check my PMs every day!
I have a few people on CL who know me and would probably vouch for me.
I don't play games or try to pull any funny business. Ask one of these guys:
Richie
Dave GS4
rominl
TLW
Neo
bluelex
alsilverbullet
Flipside909
JoeZ
Photos:
At ToyotaFest 5/3/2008:
Rolling shot (look killer when moving!)
Offset shot:
Close-up, rear wheel:
Last edited by SoCalSC4; 12-17-08 at 07:18 PM.
#7
Lexus Fanatic
Yeah, times are tough right now, otherwise I'd be pm'ing you about these my man. Good luck with the sale, these rims are SUPER nice.
Trending Topics
#8
Lexus Champion
Thread Starter
Thanks for the kind words, guys.
Wheels are still on the car at the moment, but I haven't driven it in over a week.
I think I put 500 miles on this car all summer. It's kind of a shame, I feel like
the car is so nice now that I am afraid to drive it.
Also, pieces of wood and bicycles fit in the Odyssey better.
Wheels are still on the car at the moment, but I haven't driven it in over a week.
I think I put 500 miles on this car all summer. It's kind of a shame, I feel like
the car is so nice now that I am afraid to drive it.
Also, pieces of wood and bicycles fit in the Odyssey better.
#9
Lexus Connoisseur
I'm vouching for the homie Bob. Good luck on the sale!
#11
Lexus Champion
Thread Starter
BTW, these wheels are spotless inside & out. The car gets driven so
seldom that the inner rims never get dirty but I do take them off every
so often and clear the inner barrels with detail spray.
No curb-shots, scratches, or issues. Basically perfect!
Thanks for all the views.
#13
Lexus Fanatic
iTrader: (33)
wow....those look great! How much did you have to mod the rear fender? and did you have to mod the front at all?? I am interested depending on shipping costs to me and what I would need to do with my car since I am a 3gen GS.
Please PM me if they are still available and someone can get me some direction as to what it will take to make these work. I am ~ 2" lowered or slightly more on the GS as of this past weekend.
Thanks!
Please PM me if they are still available and someone can get me some direction as to what it will take to make these work. I am ~ 2" lowered or slightly more on the GS as of this past weekend.
Thanks!
#14
Lexus Champion
iTrader: (4)
Join Date: Dec 2004
Location: IN THE POKER ROOM!!!!
Posts: 10,823
Likes: 0
Received 1 Like
on
1 Post
wow....those look great! How much did you have to mod the rear fender? and did you have to mod the front at all?? I am interested depending on shipping costs to me and what I would need to do with my car since I am a 3gen GS.
Please PM me if they are still available and someone can get me some direction as to what it will take to make these work. I am ~ 2" lowered or slightly more on the GS as of this past weekend.
Thanks!
Please PM me if they are still available and someone can get me some direction as to what it will take to make these work. I am ~ 2" lowered or slightly more on the GS as of this past weekend.
Thanks!
Mike these would look so hot on your GS