Wheel Application Question
#1
Driver School Candidate
Thread Starter
Join Date: Mar 2003
Location: California
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
I am going to put 20x9 in rims all around with an offset of 38. I was planning to run 235 35 20 and 255 35 20's. However I was told by the wheel store that I would still encounter rubbing. I was told that it would require some modifications in the form of replacing bolts or relocating them. I am going to run these wheels on the stock suspension. Does this sound correct or is this guy trying to squeeze some $ from me? 2003 gs 300.
#2
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
the offset is ok, aggressive for the front. with 245 in the front you will rub a bit. i am not sure with 235, but profile too low for me, i would stick with 245. just roll the front fender a bit and you should be able to get rid of most rubbing.
i don't know about the replacing bolts part, no idea what they are trying to say.
the rear should be no problem at all
i don't know about the replacing bolts part, no idea what they are trying to say.
the rear should be no problem at all
Thread
Thread Starter
Forum
Replies
Last Post
is250rida
IS - 2nd Gen (2006-2013)
2
11-01-08 01:29 AM