What is the offset for GS?
#2
It depends on what you want to do with the wheels, i.e. how aggressive you want to go. The OEM 16s, for example, is +50 but I doubt if you want the wheels to be that recessed in the wheel well. Do you want the same at all 4 corners or staggered? You would need 2 different offsets (one for front and one for rear) depending on the rim width.
Read this for more suggestions/explanations. If you have additional questions afterwards, come on back.
http://www.lexusgonewild.com/article...lFitment.shtml
Read this for more suggestions/explanations. If you have additional questions afterwards, come on back.
http://www.lexusgonewild.com/article...lFitment.shtml
#5
Originally posted by Gs L-tune
My wheels gonna be 20x8.50 front and 20x9.5 rear. I want all four corners to be the same so i can have good balance
My wheels gonna be 20x8.50 front and 20x9.5 rear. I want all four corners to be the same so i can have good balance
#6
Originally posted by Gs L-tune
My wheels gonna be 20x8.50 front and 20x9.5 rear. I want all four corners to be the same so i can have good balance
My wheels gonna be 20x8.50 front and 20x9.5 rear. I want all four corners to be the same so i can have good balance
the guide i posted up, it makes the wheels flush as much as it can to the outside of the fender for better looking. that's what most people look for anyway
Trending Topics
#8
Originally posted by Gs L-tune
yeah i'm talking about wheel balance. So i will be fine with any offset right?
yeah i'm talking about wheel balance. So i will be fine with any offset right?
and for offset, try to read my guide first to get some ideas. dont' get "any offset" you want, you will regret
Last edited by rominl; 12-06-04 at 02:12 AM.
Thread
Thread Starter
Forum
Replies
Last Post
2FiVE8
Wheels, Tires & Brakes Forum
3
12-22-06 04:18 PM