are any of you guys tired of buying tires!!!!!
#4
Pole Position
![Red face](https://www.clublexus.com/forums/images/icons/icon11.gif)
It's a bummer, but the lower the profile with the larger size........your not going to get much mileage out of the tire......and they are damn expensive!
![Sad](https://www.clublexus.com/forums/images/smilies/sad.gif)
#7
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
hahaha...
when I had my honda accord, I went through 3 SETS of tires the first year I had my wheels and drop....luckly they where 18"s..
But the SO3 on my current HREs are holding up pretty good......
when I had my honda accord, I went through 3 SETS of tires the first year I had my wheels and drop....luckly they where 18"s..
But the SO3 on my current HREs are holding up pretty good......
Trending Topics
#8
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
TLW brings up an excellent point.
How hard would it be to weld in an adjustable camber piece to a Lexus UCA ( Upper Control Arm)
How many of you are familiar with Ingalls products?:
http://www.ingallseng.com/graphics/P...ures/35570.jpg
Love the design of this UCA:
http://www.overboost.com/obs/product...id=88&sc_name=
If link does not work see Manufacturer Part #: 516-05-0680 , control arm for a Honda Civic 96-2000.
How hard would it be to weld in an adjustable camber piece to a Lexus UCA ( Upper Control Arm)
How many of you are familiar with Ingalls products?:
http://www.ingallseng.com/graphics/P...ures/35570.jpg
Love the design of this UCA:
http://www.overboost.com/obs/product...id=88&sc_name=
If link does not work see Manufacturer Part #: 516-05-0680 , control arm for a Honda Civic 96-2000.
Last edited by damon; 09-03-05 at 12:58 AM.
#10
Pole Position
![Wink](https://www.clublexus.com/forums/images/icons/icon12.gif)
This is why I stick to factory size tires. They may not be exactly 'Bling, Bling' but with the right tire, I can get 60,000 - 80,000 miles on a set for a fraction of the price of the larger lower profile sets that barely get 20k.
![Wink](https://www.clublexus.com/forums/images/smilies/wink.gif)
![Stick Out Tongue](https://www.clublexus.com/forums/images/smilies/tongue.gif)
#12
Pole Position
![Cool](https://www.clublexus.com/forums/images/icons/icon6.gif)
Originally Posted by rominl
well you are a modding a lexus, so prepared to pay. a set of tire is only about 1k, i think people should be ablet o afford that. otherwise, the stock setup is always there ![Smilie](https://www.clublexus.com/forums/images/smilies/smile.gif)
![Smilie](https://www.clublexus.com/forums/images/smilies/smile.gif)
![Uhh...](https://www.clublexus.com/forums/images/smilies/1387914497.gif)
#13
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
On a more practical basis, I chosed not to go staggered so I can rotate them.
This will help somewhat and going with a higher treadwear rating (~340) instead of the super low z-ratings.
I drive alot so there's no way I can be changing these tires too frequently
This is my first time going low profiles, so we'll see how long these will last
This will help somewhat and going with a higher treadwear rating (~340) instead of the super low z-ratings.
I drive alot so there's no way I can be changing these tires too frequently
![EEK!](https://www.clublexus.com/forums/images/smilies/eek1.gif)
This is my first time going low profiles, so we'll see how long these will last
![Stick Out Tongue](https://www.clublexus.com/forums/images/smilies/tongue.gif)
Thread
Thread Starter
Forum
Replies
Last Post
cerberusM5
LS - 3rd Gen (2001-2006)
16
04-02-17 07:30 PM