SSK0771

I am in a process of buying brand new 19" EXXE wheels at EXTREAMLY LOW price for my SC430

I currently have 19" Maya (Maido) GR5 on my SC430 but I could not pass up this GREAT deal on the wheels so I decided to purchase them anyways.

Front is 19x9 & rear is 19x10. They are multi piece wheels made by WORK.

Need your opinions on this wheels.

Also does anyone know anything about this wheels other than they are made by WORK?

I know WORK is very well known high quality wheel manufacture in Japan

Please give your inputs on what you know about this wheels.

Here are some pics.

Pics shows18"s but I ordered 19"s

(The pics on tread are from www.l-tunedparts.com & I wanted to apologize for using your pic but I could not find any decent/any pics of this wheels when I did a search on yahoo. THANKS)

SSK0771

Here is pic #2

SSK0771

Here is a pic of front lip.

SSK0771

Here is a pic of rear lip.

SSK0771

Here is a pic from different angel.

SSK0771

Here is a pic from another angel.

SSK0771

Here is a last pic.

rominl

iTrader: (4)

with the right offset i think they will look pretty good

i hope the rear (19x10) is nothing like what's shown there (18x10) in terms of offset. +44 is way off for the sc430 rear

SSK0771

I know.

Lots of people have been telling me that but I want to make sure that the wheels don't rub since I am getting a real aggressive offset and currently have aggressive offset now.

SSK0771

What up rominl?

I am getting a very aggressive offsets.

Here are the specs.

Front: 19 x 9 with +26 offset ( same as my Maya GR5)

Rear: 19x10 with +26 offet (currently have 19 x 10.5 w/ +29 offset)

Based on my assumption/calculation, it should fit fine with no rubbing issue.
If 19 x 10.5 with 29 offset fits with no rubbing, I am pretty sure 19 x 10 with +26 offset should be OK.


By the way does anyone know how many milimeters is in 1/2 inch?

rominl

iTrader: (4)

so what offset are you going to get next? i am interested in knowing

Neo

iTrader: (3)

LOL. You guys posted at the same time.

rominl

iTrader: (4)

that offset is nothing.

gsxotic is running 9 +24 and 10 +24

i am running 20x9 +30 and 20x10.5 +29 (same as 10 +23)

as long as you get 245 and 275 tires then you are ok

for easier calculation, you can think of 1/2" as 12mm. but technically, 1" = 25.4mm

rominl

iTrader: (4)

and keep in mind, with these offsets it's more about what brand and size of tires you run too. if you run 285 on 10 +26 it's going to be very close

SSK0771

I am running 255-35-19's in the front & 275-35-19's in the rear.

Do you think it will rub if I lower my car?

By the way how much did you pay for the coilovers? How much was the installation?