Would this 20' wheel .40 offset fit my 99 GS300
#1
Pole Position
Thread Starter
Join Date: Mar 2002
Location: Texas
Posts: 274
Likes: 0
Received 0 Likes
on
0 Posts
Would this 20' wheel .40 offset fit my 99 GS300
Hey pro's need your advice and need it soon. Looking to buy some 20 wheels for my 99 gs3. Theres this set of wheels that are staggered 20x8.5 front w/offset of 40 and rear 20x10 w/offset of 45. Would these wheels fit my car? I got some 20's right now not sure of the offset but i know the fronts are 20x9's and rears are 20x10's.. Let me know thanks
#2
The One
iTrader: (3)
Originally Posted by vulaevu
Hey pro's need your advice and need it soon. Looking to buy some 20 wheels for my 99 gs3. Theres this set of wheels that are staggered 20x8.5 front w/offset of 40 and rear 20x10 w/offset of 45. Would these wheels fit my car? I got some 20's right now not sure of the offset but i know the fronts are 20x9's and rears are 20x10's.. Let me know thanks
#4
Pole Position
Thread Starter
Join Date: Mar 2002
Location: Texas
Posts: 274
Likes: 0
Received 0 Likes
on
0 Posts
really? cux i got some staggered 20x9's in the front right now and i got about a 2 inch lip on this wheel. With this other wheel im trying to buy theres practicly no lip at all. The rears got about a 2inch lip on these wheels im trying to purchase. Alright well hopefull this is it..
#5
The One
iTrader: (3)
Although offset and width plays a role, the wheel design is also very important. You can have 2 wheels with the same width and offset looking different with different lip sizes (including no lip) if that is the design of the rim.
I am just going by the numbers and they look safe. Depending on your lowering and tire specs, you will get the typical 20s rubbing but there is not much you can do about it. Again, depending o lowering and tires, you MAY need to touch the front fenders. The rears should be fine.
I am just going by the numbers and they look safe. Depending on your lowering and tire specs, you will get the typical 20s rubbing but there is not much you can do about it. Again, depending o lowering and tires, you MAY need to touch the front fenders. The rears should be fine.
#6
Pole Position
Thread Starter
Join Date: Mar 2002
Location: Texas
Posts: 274
Likes: 0
Received 0 Likes
on
0 Posts
I appreciate everyones input. Just realized that the lug pattern was not a 5x 114.3 as desribed but, turned out to be a rare 5x 108. So turns out the deal was too good to be true. Thanks again.
Last edited by vulaevu; 11-01-05 at 12:21 PM. Reason: added more info
#7
Pole Position
Thread Starter
Join Date: Mar 2002
Location: Texas
Posts: 274
Likes: 0
Received 0 Likes
on
0 Posts
Hey pro's i got another one for yah.. Its some staggered 20's Axis MOD's that coming off a 350Z. 20x9 front 20x10 rear. Will this fit the GS or will it be too aggressive on the offset?
Trending Topics
#10
Pole Position
Thread Starter
Join Date: Mar 2002
Location: Texas
Posts: 274
Likes: 0
Received 0 Likes
on
0 Posts
Darn really? well you guys know a whole lot better then me.. Thanks.. ohh i think he mention that offset was like 30 or something like that. so i guess that means heck no right.