I thought this might be a interesting and helpfu tread to start. Especially for people who are interested in buying some wheel. I know there is a gallery of cars with after market wheels but there is no specs or any detailed info.

So I wanted to start a tread with pics and detail of the setup.

Please post pics of your car with after market wheel.

Please include

Wheel Name and Maker?

Wheel spec/size(front & rear along with offset) :

Cast or Forged?

Tires size (front & rear)

Was the car lowered? if yes, How much did you lower it?

How did you lower your car? Springs (name?) Suspension Ktt (name?)use to lower your car?

Any rubbing?

Did you roll your fender?

If you don't know the info just put (?)


Thanks.

 

I guess I have to start.

Maya GR5

Front 19x9 with +26 offset Rear: 19x10.5 with +29 offset

2 or 3 ? piece cast wheel

Front 255-35-19 rear 275-35-19 Toyo T1-S

Not lowered

No rubbing

Fender NOT rolled.

 

Exxe (Work Euroline S2H)

Front 19x9 with +26 offset Rear 19x10 +26 offset

2 piece cast

Front 255-35-19 rear 275-35-19 Toyo T1-S

Not lowered

No rubbing

Fender NOT rolled

 

Well, here is a bunch for the SC300/400.

https://www.clublexus.com/forums/sho...d.php?t=184553

 

Anymore pics and specs?

 

Hi Guys,
Here are my Amistad Type R in SBC finish
19 x 9 245/35/19
19 x 10 275/30/19
Michellin Pilot Sport PS2
We have had great weather the last few days and I hyave taken the car out a few times. I can't beleive all the staring and comments from people. Some people are even pulling me over to see the car. I have posted a few more pics in the gallery. Thanks to all you guys for helping me make the right choice with the sizes. Especially Henry and Mark. Thanks guys I owe it all to you!!!
I

 

Axis Sev7en MOD with Maxis lip. 19x8. +45mm front. +40mm rear. Tanabe NF210 springs. 1.5" fron 1.0" rear. 225/35/19 tires (bad choice)

 

Anymore?

bump

 

Wheels: IForged Flux 3pc. Brushed centers polished lips

Sizes and offsets : 20 x 8.5 (F) +36 , 20 x 10 (R) +38
2" lip in front 3" lip in rear

Bridgestone S0-3
245/35/20 (F)
285/30/20 (R)

Suspension - ghetto style, cut Eibachs

Rear fenders rolled.

Here are a few pics

B4 I rolled my rear fenders


Front wheel

 

My bro's car

Brand: WORK
Model: VS-XX
Finish: Gunmetal centers, anodized lips 3.5" lip (R) 2" lip (F)
Sizes: 19 x 8.5 (f) high disk, will clear BBK, 19 x 10.5 (r)
Offsets: +40 (f), +42 (r)
Tires: Michelin Pilot Sport PS2 - 235/35/19 (F), 265/30/19 (R)
Suspension: JIC FLT-A2 coilovers

Rear fenders are rolled

Here are a few pics

 

Here's my old set-up:

Zone Wheels, 'Zone 3' style

Front: 20x9.5 +40 2.0" lip 255/35-20 Yokohama AVS Sport (clearance for 14" StopTech or Brembo)
Rear: 20x10.5 +40 3.5" lip 285/30-20 Yokohama AVS Sport

Forged centers, spun/rolled/heat treated outers

Brushed/clear coated centers, chrome outers, polished & clear coated inner rims

Suspension: H&R coilovers, Daizen anti-sway bars. Lowered approx. 2.0" front & rear

Fenders:
front: pulled & rolled, plastic splash shields heated & moved
rear: rolled & cut

Rubbing:
Front: rubs plastic at full steering-lock only when backing up.
Rear: no rubbing whatsoever

 

I like your wheels. You have any close up pics of the wheels?

 

blitz type 03s
18x8 w/ 225/40 PS2
approx 1.5" drop
no fender mods
front only rubs plastic wheel well backing up

 

bump bump bump

 

Can you please in detail describe the pull and roll trick in the front I have 20X8.5 35mm in the front with 245/30's on stock suspension and Iam rubbing like F@#$%& no tommorow - on stock suspension, I want to drop the car but worried, the problem will be worse.
Thanks a lot, T