SquadoneGS

iTrader: (2)

Hello Guys, I am new to this forum and just bought a 99 GS300. First investment is going to be wheels and suspension and I have no idea on what wheel specs I need. I am looking to go with 20" IForged wheels and wanted to know the widest i can go. I want to push the biggest possible lip for the rear and don't know how far I can go on a stock wheel base. 20x10.0 back max? Can you guys help me with what wheel specs i can do before i have them start making the wheel. And what suspension set up do you prefer. I was thinking Tein CS or going with a brand called KW. Please HELP> Thanks Guys!

AZDesertGS

iTrader: (4)

There is a lot of info in the "Tire and Wheel" section....one thing I went by was romini writeup....hopet his helps

http://www.lgwnorcal.com/articles/WheelFitment.shtml

GS300Rich

A few here have HREs with 20 x 11 in the rear so it is possible. As far as the biggest lip for iForged I believe it is still 4", and to get that you need the extreme fit group of wheels in 3pc. For more info you can pm Derrick @ D2Autosport. Tell him what you want and iForged will take care of the offsets and such

V8_Aristo

Are you willing to shave the wheel well lips? If you are, 20x11 is possible.

Neo

iTrader: (3)

Yup. It all depends on how far you want to go to get your goal. Things to consider: shaving fender lips, stretched tires, and camber adjustments. All these options will get you a very aggressive setup, but there are downsides too.

rominl

iTrader: (4)

actually even without shaving the lips you can still fit 11. but by shaving it you can get more lip size that's for sure.

D2-AUTOSPORT

Big lip and wide width are not necessarily one in the same, in some cases you can get a larger lip on a 20x10 than on a 20x11 so be sure of what you want. I have KW Variant 3's on my personal car and they are great. We can get you set up with a set of iFORGED and if its big lip your after, then save your money with the 11's (uness you need the extra traction for forced induction, etc)

SquadoneGS

iTrader: (2)

Thanks Guys, yeah well i dont think i would like to go to the extreme with the lip, i'd like a 4 inch lip, did a little research and could go with 20x10 and 20x9.5 in the front. And i called GROUP 5 motorsports here in san diego and they say KW doesn't make a coilover for the 98+ GS300. Is that true? Please let me know. THANKS AGAIN GUYS. Appreciate the help.

Neo

iTrader: (3)

Why so wide up front?