Fitment question..
#1
Driver
Thread Starter
Join Date: Nov 2003
Location: Texas
Posts: 148
Likes: 0
Received 0 Likes
on
0 Posts
Fitment question..
I looked on the fitment guide, but wanted another opinion. Will these sizes fit on a slammed SC300?
19x8f 30mm offset
19x10 28mm offset
What size tires would you guys run?
thanks,
SW
19x8f 30mm offset
19x10 28mm offset
What size tires would you guys run?
thanks,
SW
#2
Lead Lap
iTrader: (7)
Originally Posted by Streetking
I looked on the fitment guide, but wanted another opinion. Will these sizes fit on a slammed SC300?
19x8f 30mm offset
19x10 28mm offset
What size tires would you guys run?
thanks,
SW
19x8f 30mm offset
19x10 28mm offset
What size tires would you guys run?
thanks,
SW
and 19x10 +29 with a 245 on it...
I'm sure you already have your fenders rolled so that's all you'll need to do to fit these...no pull necessary unless you want to fit a wider tire on it.
Be sure to post some pix
#3
Driver
Thread Starter
Join Date: Nov 2003
Location: Texas
Posts: 148
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by ACleanSC4
I have 19x8.5 +15 with 235 on it
and 19x10 +29 with a 245 on it...
I'm sure you already have your fenders rolled so that's all you'll need to do to fit these...no pull necessary unless you want to fit a wider tire on it.
Be sure to post some pix
and 19x10 +29 with a 245 on it...
I'm sure you already have your fenders rolled so that's all you'll need to do to fit these...no pull necessary unless you want to fit a wider tire on it.
Be sure to post some pix
I do want to run at least a 275/30/19 r and a 235/35/19f..
SW
#4
Pole Position
Join Date: Feb 2004
Location: Pennsylvania
Posts: 221
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Streetking
thanks, I'm building a new daily driver.. '97 SC300 AT with a NAT kit from Boost Logic..
I do want to run at least a 275/30/19 r and a 235/35/19f..
SW
I do want to run at least a 275/30/19 r and a 235/35/19f..
SW
Thread
Thread Starter
Forum
Replies
Last Post
Dan@FSM
GS - 1st Gen (1993-1997)
4
07-23-08 09:03 AM