dsouth

iTrader: (4)

Model SSR GT3 19X9.0, offset HP +31, type E, 19x8.5, offset LO +30, type C.

dsouth

iTrader: (4)

What no one knows??
Where are the wheel guru's at??

SoCalSC4

If they are "Lo Disk," probably not. You're taking about over the Supra Gen 4 FRONT caliper, right?

The Tire Rack sells the SSR GT3... I would ask them. Most of the experts on Club Lexus don't have the engineering drawings or dimensions for the wheels in question.

The Supra calipers are 37mm from the hub/wheel mounting surface to the outermost portion of the caliper (also called the "X-factor" or caliper overhang). You need at least 3mm extra space to provide proper caliper-to-wheel clearance, so the wheels need to have (at least) 40mm distance from the backpad to the back of the spoke.

An educated guess here: The GT3 is a very flat wheel. You probably need a "Hi Disk" to clear the front Supra caliper.

kietlander

low disk will never clear unless u get lower offsets.

lexforlife

iTrader: (7)

no

they will not clear

i have 19x8.5 +37 high disk and when i had the supras they cleared by 3mm or so

AME_VIP

iTrader: (2)

Socal is bang on with 40mm clearance.

We can't answer this for you because each manufacturer uses different measurements for their discs !!! EI Weds lo is different that SSR lo

dsouth

iTrader: (4)

Thanks everyone. The search continues.