Hurley

I have a Sc300 and im looking at some tsw montage wheels, 19x10.5 all around. I havent found anyone running a similair setup so I firgured I'd ask, at stock ride height will I need any fender mods to run these if so how much?

Thanks for the help, Hurley

Also what do you guys think of the wheels??

Seize

In the rear a 10.5" is feasible, in front, I'm thinking your going to need alot of work done, probably wide-body with fender flares (depending on your offset of course)

PureDrifter

iTrader: (10)

theres a reason why there isnt anyone with that setup.
BECAUSE IT WONT WORK

19x10.5 is WAY too wide for the front of an SC w/o MAJOR fender mods no matter what the ride height is.

if u want those wheels u can have ur 10.5 in the rear but no more than 9 MAYBE 9.5 in the front with shaving.

plex

iTrader: (11)

What are the offsets?

Hurley

I dont have them yet and I would be ordering them so i can get whatever offset. The company says 30 for the sc300, could it work with that offset without major fender mods?

plex

iTrader: (11)

30 offset with 10.5 for the rear will be fine with just rolling fenders fronts with +30 will need more work than rear.

PureDrifter

iTrader: (10)

just an FYI, TSW isnt a custom company in that u can only get wheels in the offsets they sell, ie-20,25,30, etc, meaning u cant custom offsets.

also, TSW's own web site shows a 9.5 as the widest front wheel on an 92 sc300 and that too is probably with either a shaved fennder or stretched tire.

mitsuguy

iTrader: (2)

I have TSW's, 19x9.5 rear on my car, with +35 offset and 275/30-19 tires they would rub if the fenders weren't rolled..