Wheel fitment on a ES330 20 staggered
09-01-06 | 06:32 PM
#1
Thread Starter
Pole Position
Joined: Sep 2005
Posts: 287
Likes: 0
From: AZ
Wheel fitment on a ES330 20 staggered
I'm looking into getting some 20"s, I'm running 19"s right now, but want to go bigger. I like the look of staggered, the problem is i have a great set of wheels but the specs are 20x8.5 ET20 and 20x9.5 ET25. Even if I ran 245/35/20 tires all around would this still be too agressive? also what about shaving the inner part of the wheel?
09-04-06 | 09:58 PM
#2
Former Sponsor
Joined: Jan 2003
Posts: 13,002
Likes: 1
From: D2'sville
I'm looking into getting some 20"s, I'm running 19"s right now, but want to go bigger. I like the look of staggered, the problem is i have a great set of wheels but the specs are 20x8.5 ET20 and 20x9.5 ET25. Even if I ran 245/35/20 tires all around would this still be too agressive? also what about shaving the inner part of the wheel?
You will have to do ALOT of shaving and pulling. Also on the ES's your other concern would be the inside of the wheel rubbing the strut. I say pass on these and get a set of wheels that are the proper spec for the car (unless you want to run a aggressive VIP fitment and committed to the work it takes to make them fit)
Thread
Thread Starter
Forum
Replies
Last Post
