Hubcentric rings for project kics 10mm spacers
#3
Lexus Champion
do your spacers have factory toyota/lexus centerbore? if so, and your wheels have the standard 73mm centerbore of most aftermarkets, then a store on ebay sell hub rings in a set of 4 for about $8.
#4
Im using Lexus G-Spider wheels, and the spacers dont have the same centerbore as the stock wheels.. there is a gap. The rear spacers are the same, but the hub rings i have fit over the stock hubs perfectly. I just cant seem to the find the same hubrings in a 10mm, rather than 15mm. Cause the rings are as thick as the spacer.
#7
Lexus Champion
Im using Lexus G-Spider wheels, and the spacers dont have the same centerbore as the stock wheels.. there is a gap. The rear spacers are the same, but the hub rings i have fit over the stock hubs perfectly. I just cant seem to the find the same hubrings in a 10mm, rather than 15mm. Cause the rings are as thick as the spacer.
Trending Topics
#8
for some reason i'm confused... you're using factory wheels, so 63.1mm centerbore... how are you using hub rings with factory wheels? afaik, nobody makes a hub ring that fits in a 63.1mm centerbore of a wheel. do your spacers have anything in the middle or just a big hole?
Now.. i have 15mm spacers in the rear, and 10mm spacers in the front. I can find on the internet the hubrings made specifically for the rear 15mm spacers, but i cant find anything for the front 10mm ones. This is all confusing i know.. ill take some pictures when i get a chance.
Go to this site: http://www.evasivemotorsports.com/me...e=PROJECT_KICS
And you can see the spacers and rings im talking about.. i cant hotlink, cause they have it disabled.
#9
Lexus Fanatic
iTrader: (33)
Why not go with the H&R?? The set up is one piece (hubcentric). You could use this for the fronts? Maybe I am not sure what you are trying to do here.
Try this link to see what I am referring to.
http://optionimports.com/10656014.html
Try this link to see what I am referring to.
http://optionimports.com/10656014.html
#10
Why not go with the H&R?? The set up is one piece (hubcentric). You could use this for the fronts? Maybe I am not sure what you are trying to do here.
Try this link to see what I am referring to.
http://optionimports.com/10656014.html
Try this link to see what I am referring to.
http://optionimports.com/10656014.html
#13
Lexus Fanatic
iTrader: (33)
Hope it works out. Wonder why they make them this way and not as one piece? any pros or cons either way??